(E. F. S.; F. By.)
Plate III.
PAINTING
Plate IV.
PAINTING
Sculpture and Carving.—Sculpture in wood and metal is ofancient date in Japan. Its antiquity is not, indeed, comparable to that of ancient Egypt or Greece, but no country besides Japan can boast a living and highly developed art that hasHistorical Sketch.numbered upwards of twelve centuries of unbroken and brilliant productiveness. Setting aside rude prehistoric essays in stone and metal, which have special interest for the antiquary, we have examples of sculpture in wood and metal, magnificent in conception and technique, dating from the earliest periods of what we may term historical Japan; that is, from near the beginning of the great Buddhist propaganda under the emperor Kimmei (540-571) and the princely hierarch, Shōtoku Taishi (573-621). Stone has never been in favour in Japan as a material for the higher expression of the sculptor’s art.
The first historical period of glyptic art in Japan reaches from the end of the 6th to the end of the 12th century, culminatingFirst Period.in the work of the great Nara sculptors, Unkei and his pupil Kwaikei. Happily, there are still preserved in the great temples of Japan, chiefly in the ancient capital of Nara, many noble relics of this period.
The place of honour may perhaps be conferred upon sculptures in wood, representing the Indian Buddhists, Asangha and Vasabandhu, preserved in the Golden Hall of Kofuku-ji, Nara. These are attributed to a Kamakura sculptor of the 8th or 9th century, and in simple and realistic dignity of pose and grand lines of composition are worthy of comparison with the works of ancient Greece. With these may be named the demon lantern-bearers, so perfect in the grotesque treatment of the diabolical heads and the accurate anatomical forms of the sturdy body and limbs; the colossal temple guardians of the great gate of Tōdai-ji, by Unkei and Kwaikei (11th century), somewhat conventionalized, but still bearing evidence of direct study from nature, and inspired with intense energy of action; and the smaller but more accurately modelled temple guardians in the Saikondo, Nara, which almost compare with the “fighting gladiator” in their realization of menacing strength. The “goddess of art” of Akishino-dera, Nara, attributed to the 8th century, is the most graceful and least conventional of female sculptures in Japan, but infinitely remote from the feminine conception of the Greeks. The wooden portrait of Vimalakirtti, attributed to Unkei, at Kofuku-ji, has some of the qualities of the images of the two Indian Buddhists. The sculptures attributed to Jōchō, the founder of the Nara school, although powerful in pose and masterly in execution, lack the truth of observation seen in some of the earlier and later masterpieces.The most perfect of the ancient bronzes is the great image of Bhaicha-djyaguru in the temple of Yakushi-ji, Nara, attributed to a Korean monk of the 7th century, named Giōgi. The bronze image of the same divinity at Hōryū-ji, said to have been cast at the beginning of the 7th century by Tori Busshi, the grandson of a Chinese immigrant, is of good technical quality, but much inferior in design to the former. The colossal Nara Daibutsu (Vairocana) at Tōdai-ji, cast in 749 by a workman of Korean descent, is the largest of the great bronzes in Japan, but ranks far below the Yakushi-ji image in artistic qualities. The present head, however, is a later substitute for the original, which was destroyed by fire.The great Nara school of sculpture in wood was founded in the early part of the 11th century by a sculptor of Imperial descent named Jōchō, who is said to have modelled his style upon that of the Chinese wood-carvers of the Tang dynasty; his traditions were maintained by descendants and followers down to the beginning of the 13th century. All the artists of this period were men of aristocratic rank and origin, and were held distinct from the carpenter-architects of the imposing temples which were to contain their works.Sacred images were not the only specimens of glyptic art produced in these six centuries; reliquaries, bells, vases, incense-burners, candlesticks, lanterns, decorated arms and armour, and many other objects, showing no less mastery of design and execution, have reached us. Gold and silver had been applied to the adornment of helmets and breastplates from the 7th century, but it was in the 12th century that the decoration reached the high degree of elaboration shown us in the armour of the Japanese Bayard, Yoshitsunē, which is still preserved at Kasuga, Nara.Wooden masks employed in the ancient theatrical performances were made from the 7th century, and offer a distinct and often grotesque phase of wood-carving. Several families of experts have been associated with this class of sculpture, and their designs have been carefully preserved and imitated down to the present day.
The place of honour may perhaps be conferred upon sculptures in wood, representing the Indian Buddhists, Asangha and Vasabandhu, preserved in the Golden Hall of Kofuku-ji, Nara. These are attributed to a Kamakura sculptor of the 8th or 9th century, and in simple and realistic dignity of pose and grand lines of composition are worthy of comparison with the works of ancient Greece. With these may be named the demon lantern-bearers, so perfect in the grotesque treatment of the diabolical heads and the accurate anatomical forms of the sturdy body and limbs; the colossal temple guardians of the great gate of Tōdai-ji, by Unkei and Kwaikei (11th century), somewhat conventionalized, but still bearing evidence of direct study from nature, and inspired with intense energy of action; and the smaller but more accurately modelled temple guardians in the Saikondo, Nara, which almost compare with the “fighting gladiator” in their realization of menacing strength. The “goddess of art” of Akishino-dera, Nara, attributed to the 8th century, is the most graceful and least conventional of female sculptures in Japan, but infinitely remote from the feminine conception of the Greeks. The wooden portrait of Vimalakirtti, attributed to Unkei, at Kofuku-ji, has some of the qualities of the images of the two Indian Buddhists. The sculptures attributed to Jōchō, the founder of the Nara school, although powerful in pose and masterly in execution, lack the truth of observation seen in some of the earlier and later masterpieces.
The most perfect of the ancient bronzes is the great image of Bhaicha-djyaguru in the temple of Yakushi-ji, Nara, attributed to a Korean monk of the 7th century, named Giōgi. The bronze image of the same divinity at Hōryū-ji, said to have been cast at the beginning of the 7th century by Tori Busshi, the grandson of a Chinese immigrant, is of good technical quality, but much inferior in design to the former. The colossal Nara Daibutsu (Vairocana) at Tōdai-ji, cast in 749 by a workman of Korean descent, is the largest of the great bronzes in Japan, but ranks far below the Yakushi-ji image in artistic qualities. The present head, however, is a later substitute for the original, which was destroyed by fire.
The great Nara school of sculpture in wood was founded in the early part of the 11th century by a sculptor of Imperial descent named Jōchō, who is said to have modelled his style upon that of the Chinese wood-carvers of the Tang dynasty; his traditions were maintained by descendants and followers down to the beginning of the 13th century. All the artists of this period were men of aristocratic rank and origin, and were held distinct from the carpenter-architects of the imposing temples which were to contain their works.
Sacred images were not the only specimens of glyptic art produced in these six centuries; reliquaries, bells, vases, incense-burners, candlesticks, lanterns, decorated arms and armour, and many other objects, showing no less mastery of design and execution, have reached us. Gold and silver had been applied to the adornment of helmets and breastplates from the 7th century, but it was in the 12th century that the decoration reached the high degree of elaboration shown us in the armour of the Japanese Bayard, Yoshitsunē, which is still preserved at Kasuga, Nara.
Wooden masks employed in the ancient theatrical performances were made from the 7th century, and offer a distinct and often grotesque phase of wood-carving. Several families of experts have been associated with this class of sculpture, and their designs have been carefully preserved and imitated down to the present day.
The second period in Japanese glyptic art extends from the beginning of the 13th to the early part of the 17th century. The great struggle between the Taira and Minamoto clans had ended, but the militant spirit was still strong, and broughtSecond Period.work for the artists who made and ornamented arms and armour. The Miyōchins, a line that claimed ancestry from the 7th century, were at the head of their calling, and their work in iron breastplates and helmets, chiefly inrepoussé, is still unrivalled. It was not until the latter half of the 15th century that there came into vogue the elaborate decoration of the sword, a fashion that was to last four hundred years.
The metal guard (tsuba), made of iron or precious alloy, was adorned with engraved designs, often inlaid with gold and silver. The free end of the hilt was crowned with a metallic cap or pommel (kashira), the other extremity next the tsuba was embraced by an oval ring (fuchi), and in the middle was affixed on each side a special ornament called themenuki, all adapted in material and workmanship to harmonize with the guard. Thekodzuka, or handle of a little knife implanted into the sheath of the short sword or dagger, was also of metal and engraved with like care. The founder of the first great line of tsuba and menuki artists was Gotō Yūjō (1440-1512), a friend of the painter Kano Motonobu, whose designs he adopted. Many families of sword artists sprang up at a later period, furnishing treasures for the collector even down to the present day, and their labours reached a level of technical mastery and refined artistic judgment almost without parallel in the art industries of Europe. Buddhist sculpture was by no means neglected during this period, but there are few works that call for special notice. The most noteworthy effort was the casting by Ono Goroyémon in 1252 of the well-known bronze image, the Kamakura Daibutsu.
The metal guard (tsuba), made of iron or precious alloy, was adorned with engraved designs, often inlaid with gold and silver. The free end of the hilt was crowned with a metallic cap or pommel (kashira), the other extremity next the tsuba was embraced by an oval ring (fuchi), and in the middle was affixed on each side a special ornament called themenuki, all adapted in material and workmanship to harmonize with the guard. Thekodzuka, or handle of a little knife implanted into the sheath of the short sword or dagger, was also of metal and engraved with like care. The founder of the first great line of tsuba and menuki artists was Gotō Yūjō (1440-1512), a friend of the painter Kano Motonobu, whose designs he adopted. Many families of sword artists sprang up at a later period, furnishing treasures for the collector even down to the present day, and their labours reached a level of technical mastery and refined artistic judgment almost without parallel in the art industries of Europe. Buddhist sculpture was by no means neglected during this period, but there are few works that call for special notice. The most noteworthy effort was the casting by Ono Goroyémon in 1252 of the well-known bronze image, the Kamakura Daibutsu.
The third period includes the 17th, 18th and the greater part of the 19th centuries. It was the era of the artisan artist. The makers of Buddhist images and of sword ornaments carried on their work with undiminished industryThird Period.and success, and some famous schools of the latter arose during this period. The Buddhist sculptors, however, tended to grow more conventional and the metal-workers more naturalistic as the 18th century began to wane. It was in connexion with architecture that the great artisan movement began. The initiator was Hidari Jingoro (1594-1652), at first a simple carpenter, afterwards one of the most famous sculptors in the land of great artists. The gorgeous decoration of the mausoleum of Iyeyasu at Nikkō, and of the gateway of the Nishi Hongwan temple at Kiōto, are the most striking instances of his handiwork or direction.
The pillars, architraves, ceilings, panels, and almost every available part of the structure, are covered with arabesques and sculptured figures of dragons, lions, tigers, birds, flowers, and even pictorial compositions with landscapes and figures, deeply carved in solid or open work—the wood sometimes plain, sometimes overlaid with pigment and gilding, as in the panelled ceiling of the chapel of Iyeyasu in Tōkyō. The designs for these decorations, like those of the sword ornaments, were adopted from the great schools of painting, but the invention of the sculptor was by no means idle. From this time the temple carvers, although still attached to the carpenters’ guild, took a place apart from the rest of their craft, and the genius of Hidari Jingoro secured for one important section of the artisan world a recognition like that which Hishigawa Moronobu, the painter and book-illustrator, afterwards won for another.
The pillars, architraves, ceilings, panels, and almost every available part of the structure, are covered with arabesques and sculptured figures of dragons, lions, tigers, birds, flowers, and even pictorial compositions with landscapes and figures, deeply carved in solid or open work—the wood sometimes plain, sometimes overlaid with pigment and gilding, as in the panelled ceiling of the chapel of Iyeyasu in Tōkyō. The designs for these decorations, like those of the sword ornaments, were adopted from the great schools of painting, but the invention of the sculptor was by no means idle. From this time the temple carvers, although still attached to the carpenters’ guild, took a place apart from the rest of their craft, and the genius of Hidari Jingoro secured for one important section of the artisan world a recognition like that which Hishigawa Moronobu, the painter and book-illustrator, afterwards won for another.
A little later arose another art industry, also emanating from the masses. The use of tobacco, which became prevalent in the 17th century, necessitated the pouch. In order to suspend this from the girdle there was employed a kind of button or toggle—thenetsuke. The metallic bowl and mouthpiece of the pipe offered a tempting surface for embellishment, as well as the clasp of the pouch; and the netsuke, being made of wood, ivory or other material susceptible of carving, also gave occasion for art and ingenuity.
The engravers of pipes, pouch clasps, and the metallic discs (kagami-buta) attached to certain netsuke, sprang from the same class and were not less original. They worked, too, with a skill little inferior to that of the Gotōs, Naras, and other aristocratic sculptors of sword ornaments, and often with a refinement which their relative disadvantages in education and associations render especially remarkable. The netsuke and the pipe, with all that pertained to it, were for the commoners what the sword-hilt and guard were for the gentry. Neither class cared to bestow jewels upon their persons, but neither spared thought or expense in the embellishment of the object they most loved. The final manifestation of popular glyptic art was theokimono, an ornament pure and simple, in which utility was altogether secondary in intention to decorative effect. Its manufacture as a special branch of art work dates from the rise of the naturalistic school of painting and the great expansion of the popular school under the Katsugawa, but the okimono formed an occasional amusement of the older glyptic artists. Some of the most exquisite andmost ingenious of these earlier productions, such as the magnificent iron eagle in the South Kensington Museum, the wonderful articulated models of crayfish, dragons, serpents, birds, that are found in many European collections, came from the studios of the Miyōchins; but these were the play of giants, and were not made as articles of commerce. The new artisan makers of the okimono struck out a line for themselves, one influenced more by the naturalistic and popular schools than by the classical art, and the quails of Kamejo, the tortoises of Seimin, the dragons of Tōun and Tōryū, and in recent years the falcons and the peacocks of Suzuki Chokichi, are the joy of the European collector. The best of these are exquisite in workmanship, graceful in design, often strikingly original in conception, and usually naturalistic in ideal. They constitute a phase of art in which Japan has few rivals.
The engravers of pipes, pouch clasps, and the metallic discs (kagami-buta) attached to certain netsuke, sprang from the same class and were not less original. They worked, too, with a skill little inferior to that of the Gotōs, Naras, and other aristocratic sculptors of sword ornaments, and often with a refinement which their relative disadvantages in education and associations render especially remarkable. The netsuke and the pipe, with all that pertained to it, were for the commoners what the sword-hilt and guard were for the gentry. Neither class cared to bestow jewels upon their persons, but neither spared thought or expense in the embellishment of the object they most loved. The final manifestation of popular glyptic art was theokimono, an ornament pure and simple, in which utility was altogether secondary in intention to decorative effect. Its manufacture as a special branch of art work dates from the rise of the naturalistic school of painting and the great expansion of the popular school under the Katsugawa, but the okimono formed an occasional amusement of the older glyptic artists. Some of the most exquisite andmost ingenious of these earlier productions, such as the magnificent iron eagle in the South Kensington Museum, the wonderful articulated models of crayfish, dragons, serpents, birds, that are found in many European collections, came from the studios of the Miyōchins; but these were the play of giants, and were not made as articles of commerce. The new artisan makers of the okimono struck out a line for themselves, one influenced more by the naturalistic and popular schools than by the classical art, and the quails of Kamejo, the tortoises of Seimin, the dragons of Tōun and Tōryū, and in recent years the falcons and the peacocks of Suzuki Chokichi, are the joy of the European collector. The best of these are exquisite in workmanship, graceful in design, often strikingly original in conception, and usually naturalistic in ideal. They constitute a phase of art in which Japan has few rivals.
The present generation is more systematically commercial in its glyptic produce than any previous age. Millions of commercial articles in metal-work, wood and ivory flood the European markets, and may be bought in any street in Europe at a small price, but they offer a variety of design and an excellence of workmanship which place them almost beyond Western competition. Above all this, however, the Japanese sculptor is a force in art. He is nearly as thorough as his forefathers, and maintains the same love of all things beautiful; and if he cannot show any epoch-making novelty, he is at any rate doing his best to support unsurpassed the decorative traditions of the past.
History has been eminently careful to preserve the names and records of the men who chiselled sword furniture. The sword being regarded as the soul of the samurai, every one who contributed to its manufacture,Sword-making Families.whether as forger of the blade or sculptor of the furniture, was held in high repute. The Gotō family worked steadily during 14 generations, and its 19th century representative—Gotō Ichijō—will always be remembered as one of the family’s greatest experts. But there were many others whose productions fully equalled and often excelled the best efforts of the Gotō. The following list gives the names and periods of the most renowned families:—
(It should be noted that the division by centuries indicates the time of a family’s origin. In a great majority of cases the representatives of each generation worked on through succeeding centuries).15th and 16th Centuries.Miyōchin; Gotō; Umetada; Muneta; Aoki; Sōami; Nakai.17th Century.Kuwamura; Mizuno; Koichi; Nagayoshi;Kuninaga; Yoshishige; Katsugi; Tsuji;Muneyoshi; Tadahira; Shōami; Hosono;Yokoya; Nara; Okada; Okamoto; Kinai; Akao;Yoshioka; Hirata; Nomura; Wakabayashi; Inouye;Yasui; Chiyo; Kaneko; Uemura; Iwamoto.18th Century.Gorobei; Shōemon; Kikugawa; Yasuyama; Noda; Tamagawa; Fujita; Kikuoka; Kizaemon; Hamano; Ōmori; Okamoto; Kashiwaya; Kusakari; Shichibei; Itō.19th Century.Natsuo; Ishiguro; Yanagawa; Honjo; Tanaka; Okano; Kawarabayashi; Oda; and many masters of the Ōmori, Hamano and Iwamoto families, as well as the five experts, Shuraku, Temmin, Ryūmin, Minjō and Minkoku.
(It should be noted that the division by centuries indicates the time of a family’s origin. In a great majority of cases the representatives of each generation worked on through succeeding centuries).
15th and 16th Centuries.
Miyōchin; Gotō; Umetada; Muneta; Aoki; Sōami; Nakai.
17th Century.
Kuwamura; Mizuno; Koichi; Nagayoshi;Kuninaga; Yoshishige; Katsugi; Tsuji;Muneyoshi; Tadahira; Shōami; Hosono;Yokoya; Nara; Okada; Okamoto; Kinai; Akao;Yoshioka; Hirata; Nomura; Wakabayashi; Inouye;Yasui; Chiyo; Kaneko; Uemura; Iwamoto.
Kuwamura; Mizuno; Koichi; Nagayoshi;
Kuninaga; Yoshishige; Katsugi; Tsuji;
Muneyoshi; Tadahira; Shōami; Hosono;
Yokoya; Nara; Okada; Okamoto; Kinai; Akao;
Yoshioka; Hirata; Nomura; Wakabayashi; Inouye;
Yasui; Chiyo; Kaneko; Uemura; Iwamoto.
18th Century.
Gorobei; Shōemon; Kikugawa; Yasuyama; Noda; Tamagawa; Fujita; Kikuoka; Kizaemon; Hamano; Ōmori; Okamoto; Kashiwaya; Kusakari; Shichibei; Itō.
19th Century.
Natsuo; Ishiguro; Yanagawa; Honjo; Tanaka; Okano; Kawarabayashi; Oda; and many masters of the Ōmori, Hamano and Iwamoto families, as well as the five experts, Shuraku, Temmin, Ryūmin, Minjō and Minkoku.
(W. An.; F. By.)
There is a radical difference between the points of view of the Japanese and the Western connoisseur in estimating the merits of sculpture in metal. The quality of the chiselling is the first feature to which the JapaneseJapanese Point of View.directs his attention; the decorative design is the prime object of the Occidental’s attention. With very rare exceptions, the decorative motives of Japanese sword furniture were always supplied by painters. Hence it is that the Japanese connoisseur draws a clear distinction between the decorative design and its technical execution, crediting the former to the pictorial artist and the latter to the sculptor. He detects in the stroke of a chisel and the lines of a graving tool subjective beauties which appear to be hidden from the great majority of Western dilettanti. He estimates the rank of a specimen by the quality of the chisel-work. The Japanesekinzoku-shi(metal sculptor) uses thirty-six principal classes of chisel, each with its distinctive name, and as most of these classes comprise from five to ten sub-varieties, his cutting and graving tools aggregate about two hundred and fifty.
Scarcely less important in Japanese eyes than the chiselling of the decorative design itself is the preparation of the field to which it is applied. There used to be a strict canonThe Field for Sculptured Decoration.with reference to this in former times.Namako(fish-roe) grounds were essential for the mountings of swords worn on ceremonial occasions, theishime(stone-pitting) orjimigaki(polished) styles being considered less aristocratic.
Namako is obtained by punching the whole surface—except the portion carrying the decorative design—into a texture of microscopic dots. The first makers of namako did not aim at regularity in the distribution of these dots; they were content to produce the effect of millet-seed sifted haphazard over the surface. But from the 15th century the punching of the dots in rigidly straight lines came to be considered essential, and the difficulty involved was so great that namako-making took its place among the highest technical achievements of the sculptor. When it is remembered that the punching tool was guided solely by the hand and eye, and that three or more blows of the mallet had to be struck for every dot, some conception may be formed of the patience and accuracy needed to produce these tiny protuberances in perfectly straight lines, at exactly equal intervals and of absolutely uniform size. Namako disposed in straight parallel lines originally ranked at the head of this kind of work. But a new kind was introduced in the 16th century. It was obtained by punching the dots in intersecting lines, so arranged that the dots fell uniformly into diamond-shaped groups of five each. This is calledgo-no-me-namako, because of its resemblance to the disposition of chequers in the Japanese game ofgo. A century later, thedaimyō namakowas invented, in which lines of dots alternated with lines of polished ground.Ishimemay be briefly described as diapering. There is scarcely any limit to the ingenuity and skill of the Japanese expert in diapering a metal surface. It is not possible to enumerate here even the principal styles of ishime, but mention may be made of thezara-maki(broad-cast), in which the surface is finely but irregularly pitted after the manner of the face of a stone; thenashi-ji(pear-ground), in which we have a surface like the rind of a pear; thehari-ishime(needle ishime), where the indentations are so minute that they seem to have been made with the point of a needle; thegama-ishime, which is intended to imitate the skin of a toad; thetsuya-ishime, produced with a chisel sharpened so that its traces have a lustrous appearance; theore-kuchi(broken-tool), a peculiar kind obtained with a jagged tool; and thegozamé, which resembles the plaited surface of a fine straw mat.Great importance has always been attached by Japanese experts to the patina of metal used for artistic chiselling. It was mainly for the sake of their patina that value attached to the remarkable alloysshakudo(3 parts of gold to 97 ofPatina.copper) andshibuichi(1 part of silver to 3 of copper). Neither metal, when it emerges from the furnace, has any beauty, shakudo being simply dark-coloured copper and shibuichi pale gun-metal. But after proper treatment2the former develops a glossy black patina with violet sheen, and the latter shows beautiful shades of grey with silvery lustre. Both these compounds afford delicate, unobtrusive and effective grounds for inlaying with gold, silver and other metals, as well as for sculpture, whether incised or in relief. Copper, too, by patina-producing treatment, is made to show not merely a rich golden sheen with pleasing limpidity, but also red of various hues, from deep coral to light vermilion, several shades of grey, and browns of numerous tones from dead-leaf to chocolate. Even greater value has always been set upon the patina of iron, and many secret recipes were preserved in artist families for producing the fine, satin-like texture so much admired by all connoisseurs.In Japan, as in Europe, three varieties of relief carving are distinguished—alto(taka-bori), mezzo (chūniku-bori) andbasso(usuniku-bori). In the opinion of the Japanese expert, these styles hold the same respective rank as that occupied by theMethods of Chiselling.three kinds of ideographic script in caligraphy. High relief carving corresponds to thekaisho, or most classical form of writing; medium relief to thegyōsho, or semi-cursive style; and low relief to thesōshoor grass character. With regard to incised chiselling, the commonest form iskebori(hair-carving), which may be called engraving, the lines being of uniform thickness and depth. Very beautiful results are obtained by the kebori method, but incomparably the finest work in the incised class is that known askata-kiri-bori. In this kind of chiselling the Japanese artist can claim to be unique as well as unrivalled. Evidently the idea of the great Yokoya experts, the originators of the style, was to break away from the somewhat formal monotony of ordinary engraving, where each line performs exactly the same function, and to convert the chisel into an artist’sbrush instead of using it as a common cutting tool. They succeeded admirably. In the kata-kiri-bori every line has its proper value in the pictorial design, and strength and directness become cardinal elements in the strokes of the burin just as they do in the brushwork of the picture-painter. The same fundamental rule applied, too, whether the field of the decoration was silk, paper or metal. The artist’s tool, be it brush or burin, must perform its task by one effort. There must be no appearance of subsequent deepening, or extending, or re-cutting or finishing. Kata-kiri-bori by a great expert is a delight. One is lost in astonishment at the nervous yet perfectly regulated force and the unerring fidelity of every trace of the chisel. Another variety of carving much affected by artists of the 17th century, and now largely used, is calledshishi-ai-boriorniku-ai-bori. In this style the surface of the design is not raised above the general plane of the field, but an effect of projection is obtained either by recessing the whole space immediately surrounding the design, or by enclosing the latter in a scarped frame. Yet another and very favourite method, giving beautiful results, is to model the design on both faces of the metal so as to give a sculpture in the round. The fashion is always accompanied by chisellingà jour(sukashi-bori), so that the sculptured portions stand out in their entirety.Inlaying with gold or silver was among the early forms of decoration in Japan. The skill developed in modern times is at least equal to anything which the past can show, and the results produced are much more imposing. ThereInlaying.are two principal kinds of inlaying: the first calledhon-zōgan(true inlaying), the secondnunome-zōgan(linen-mesh inlaying). As to the former, the Japanese method does not differ from that seen in the beautiful iron censers and vases inlaid with gold which the Chinese produced from theSüen-tēera (1426-1436). In the surface of the metal the workman cuts grooves wider at the base than at the top, and then hammers into them gold or silver wire. Such a process presents no remarkable features, except that it has been carried by the Japanese to an extraordinary degree of elaborateness. The nunome-zōgan is more interesting. Suppose, for example, that the artist desires to produce an inlaid diaper. His first business is to chisel the surface in lines forming the basic pattern of the design. Thus, for a diamond-petal diaper the chisel is carried across the face of the metal horizontally, tracing a number of parallel bands divided at fixed intervals by ribs which are obtained by merely straightening the chisel and striking it a heavy blow. The same process is then repeated in another direction, so that the new bands cross the old at an angle adapted to the nature of the design. Several independent chisellings may be necessary before the lines of the diaper emerge clearly, but throughout the whole operation no measurement of any kind is taken, the artist being guided entirely by his hand and eye. The metal is then heated, not to redness, but sufficiently to develop a certain degree of softness, and the workman, taking a very thin sheet of gold (or silver), hammers portions of it into the salient points of the design. In ordinary cases this is the sixth process. The seventh is to hammer gold into the outlines of the diaper; the eighth, to hammer it into the pattern filling the spaces between the lines, and the ninth and tenth to complete the details. Of course the more intricate the design the more numerous the processes. It is scarcely possible to imagine a higher effort of hand and eye than thisnunome-zōgandisplays, for while intricacy and elaborateness are carried to the very extreme, absolute mechanical accuracy is obtained. Sometimes in the same design we see gold of three different hues, obtained by varying the alloy. A third kind of inlaying, peculiar to Japan, issumi-zōgan(ink-inlaying), so called because the inlaid design gives the impression of having been painted with Indian ink beneath the transparent surface of the metal. The difference between this process and ordinary inlaying is that forsumi-zōganthe design to be inlaid is fully chiselled out of an independent block of metal with sides sloping so as to be broader at the base than at the top. The object which is to receive the decoration is then channelled in dimensions corresponding to those of the design block, and the latter having been fixed in the channels, the surface is ground and polished until an intimate union is obtained between the inlaid design and the metal forming its field. Very beautiful effects are thus produced, for the design seems to have grown up to the surface of the metal field rather than to have been planted in it. Shibuichi inlaid with shakudo used to be the commonest combination of metals in this class of decoration, and the objects usually depicted were bamboos, crows, wild-fowl under the moon, peony sprays and so forth.A variety of decoration much practised by early experts, and carried to a high degree of excellence in modern times, ismokume-ji(wood-grained ground). The process in this case is to take a thin plate of metal and beat it into another plateWood-grained Grounds.of similar metal, so that the two, though welded together, retain their separate forms. The mass, while still hot, is coated withhena-tsuchi(a kind of marl) and rolled in straw ash, in which state it is roasted over a charcoal fire raised to glowing heat with the bellows. The clay having been removed, another plate of the same metal is beaten in, and the same process is repeated. This is done several times, the number depending on the quality of graining that the expert desires to produce. The manifold plate is then heavily punched from one side, so that the opposite face protrudes in broken blisters, which are then hammered down until each becomes a centre of wave propagation. In fine work the apex of the blister is ground off before the final hammering. Iron was the metal used exclusively for work of this kind down to the 16th century, but various metals began thenceforth to be combined. Perhaps the choicest variety is gold graining in a shakudo field. By repeated hammering and polishing the expert obtains such control of the wood-grain pattern that its sinuosities and eddies seem to have developed symmetry without losing anything of their fantastic grace. There are other methods of producingmokume-ji.
Namako is obtained by punching the whole surface—except the portion carrying the decorative design—into a texture of microscopic dots. The first makers of namako did not aim at regularity in the distribution of these dots; they were content to produce the effect of millet-seed sifted haphazard over the surface. But from the 15th century the punching of the dots in rigidly straight lines came to be considered essential, and the difficulty involved was so great that namako-making took its place among the highest technical achievements of the sculptor. When it is remembered that the punching tool was guided solely by the hand and eye, and that three or more blows of the mallet had to be struck for every dot, some conception may be formed of the patience and accuracy needed to produce these tiny protuberances in perfectly straight lines, at exactly equal intervals and of absolutely uniform size. Namako disposed in straight parallel lines originally ranked at the head of this kind of work. But a new kind was introduced in the 16th century. It was obtained by punching the dots in intersecting lines, so arranged that the dots fell uniformly into diamond-shaped groups of five each. This is calledgo-no-me-namako, because of its resemblance to the disposition of chequers in the Japanese game ofgo. A century later, thedaimyō namakowas invented, in which lines of dots alternated with lines of polished ground.Ishimemay be briefly described as diapering. There is scarcely any limit to the ingenuity and skill of the Japanese expert in diapering a metal surface. It is not possible to enumerate here even the principal styles of ishime, but mention may be made of thezara-maki(broad-cast), in which the surface is finely but irregularly pitted after the manner of the face of a stone; thenashi-ji(pear-ground), in which we have a surface like the rind of a pear; thehari-ishime(needle ishime), where the indentations are so minute that they seem to have been made with the point of a needle; thegama-ishime, which is intended to imitate the skin of a toad; thetsuya-ishime, produced with a chisel sharpened so that its traces have a lustrous appearance; theore-kuchi(broken-tool), a peculiar kind obtained with a jagged tool; and thegozamé, which resembles the plaited surface of a fine straw mat.
Great importance has always been attached by Japanese experts to the patina of metal used for artistic chiselling. It was mainly for the sake of their patina that value attached to the remarkable alloysshakudo(3 parts of gold to 97 ofPatina.copper) andshibuichi(1 part of silver to 3 of copper). Neither metal, when it emerges from the furnace, has any beauty, shakudo being simply dark-coloured copper and shibuichi pale gun-metal. But after proper treatment2the former develops a glossy black patina with violet sheen, and the latter shows beautiful shades of grey with silvery lustre. Both these compounds afford delicate, unobtrusive and effective grounds for inlaying with gold, silver and other metals, as well as for sculpture, whether incised or in relief. Copper, too, by patina-producing treatment, is made to show not merely a rich golden sheen with pleasing limpidity, but also red of various hues, from deep coral to light vermilion, several shades of grey, and browns of numerous tones from dead-leaf to chocolate. Even greater value has always been set upon the patina of iron, and many secret recipes were preserved in artist families for producing the fine, satin-like texture so much admired by all connoisseurs.
In Japan, as in Europe, three varieties of relief carving are distinguished—alto(taka-bori), mezzo (chūniku-bori) andbasso(usuniku-bori). In the opinion of the Japanese expert, these styles hold the same respective rank as that occupied by theMethods of Chiselling.three kinds of ideographic script in caligraphy. High relief carving corresponds to thekaisho, or most classical form of writing; medium relief to thegyōsho, or semi-cursive style; and low relief to thesōshoor grass character. With regard to incised chiselling, the commonest form iskebori(hair-carving), which may be called engraving, the lines being of uniform thickness and depth. Very beautiful results are obtained by the kebori method, but incomparably the finest work in the incised class is that known askata-kiri-bori. In this kind of chiselling the Japanese artist can claim to be unique as well as unrivalled. Evidently the idea of the great Yokoya experts, the originators of the style, was to break away from the somewhat formal monotony of ordinary engraving, where each line performs exactly the same function, and to convert the chisel into an artist’sbrush instead of using it as a common cutting tool. They succeeded admirably. In the kata-kiri-bori every line has its proper value in the pictorial design, and strength and directness become cardinal elements in the strokes of the burin just as they do in the brushwork of the picture-painter. The same fundamental rule applied, too, whether the field of the decoration was silk, paper or metal. The artist’s tool, be it brush or burin, must perform its task by one effort. There must be no appearance of subsequent deepening, or extending, or re-cutting or finishing. Kata-kiri-bori by a great expert is a delight. One is lost in astonishment at the nervous yet perfectly regulated force and the unerring fidelity of every trace of the chisel. Another variety of carving much affected by artists of the 17th century, and now largely used, is calledshishi-ai-boriorniku-ai-bori. In this style the surface of the design is not raised above the general plane of the field, but an effect of projection is obtained either by recessing the whole space immediately surrounding the design, or by enclosing the latter in a scarped frame. Yet another and very favourite method, giving beautiful results, is to model the design on both faces of the metal so as to give a sculpture in the round. The fashion is always accompanied by chisellingà jour(sukashi-bori), so that the sculptured portions stand out in their entirety.
Inlaying with gold or silver was among the early forms of decoration in Japan. The skill developed in modern times is at least equal to anything which the past can show, and the results produced are much more imposing. ThereInlaying.are two principal kinds of inlaying: the first calledhon-zōgan(true inlaying), the secondnunome-zōgan(linen-mesh inlaying). As to the former, the Japanese method does not differ from that seen in the beautiful iron censers and vases inlaid with gold which the Chinese produced from theSüen-tēera (1426-1436). In the surface of the metal the workman cuts grooves wider at the base than at the top, and then hammers into them gold or silver wire. Such a process presents no remarkable features, except that it has been carried by the Japanese to an extraordinary degree of elaborateness. The nunome-zōgan is more interesting. Suppose, for example, that the artist desires to produce an inlaid diaper. His first business is to chisel the surface in lines forming the basic pattern of the design. Thus, for a diamond-petal diaper the chisel is carried across the face of the metal horizontally, tracing a number of parallel bands divided at fixed intervals by ribs which are obtained by merely straightening the chisel and striking it a heavy blow. The same process is then repeated in another direction, so that the new bands cross the old at an angle adapted to the nature of the design. Several independent chisellings may be necessary before the lines of the diaper emerge clearly, but throughout the whole operation no measurement of any kind is taken, the artist being guided entirely by his hand and eye. The metal is then heated, not to redness, but sufficiently to develop a certain degree of softness, and the workman, taking a very thin sheet of gold (or silver), hammers portions of it into the salient points of the design. In ordinary cases this is the sixth process. The seventh is to hammer gold into the outlines of the diaper; the eighth, to hammer it into the pattern filling the spaces between the lines, and the ninth and tenth to complete the details. Of course the more intricate the design the more numerous the processes. It is scarcely possible to imagine a higher effort of hand and eye than thisnunome-zōgandisplays, for while intricacy and elaborateness are carried to the very extreme, absolute mechanical accuracy is obtained. Sometimes in the same design we see gold of three different hues, obtained by varying the alloy. A third kind of inlaying, peculiar to Japan, issumi-zōgan(ink-inlaying), so called because the inlaid design gives the impression of having been painted with Indian ink beneath the transparent surface of the metal. The difference between this process and ordinary inlaying is that forsumi-zōganthe design to be inlaid is fully chiselled out of an independent block of metal with sides sloping so as to be broader at the base than at the top. The object which is to receive the decoration is then channelled in dimensions corresponding to those of the design block, and the latter having been fixed in the channels, the surface is ground and polished until an intimate union is obtained between the inlaid design and the metal forming its field. Very beautiful effects are thus produced, for the design seems to have grown up to the surface of the metal field rather than to have been planted in it. Shibuichi inlaid with shakudo used to be the commonest combination of metals in this class of decoration, and the objects usually depicted were bamboos, crows, wild-fowl under the moon, peony sprays and so forth.
A variety of decoration much practised by early experts, and carried to a high degree of excellence in modern times, ismokume-ji(wood-grained ground). The process in this case is to take a thin plate of metal and beat it into another plateWood-grained Grounds.of similar metal, so that the two, though welded together, retain their separate forms. The mass, while still hot, is coated withhena-tsuchi(a kind of marl) and rolled in straw ash, in which state it is roasted over a charcoal fire raised to glowing heat with the bellows. The clay having been removed, another plate of the same metal is beaten in, and the same process is repeated. This is done several times, the number depending on the quality of graining that the expert desires to produce. The manifold plate is then heavily punched from one side, so that the opposite face protrudes in broken blisters, which are then hammered down until each becomes a centre of wave propagation. In fine work the apex of the blister is ground off before the final hammering. Iron was the metal used exclusively for work of this kind down to the 16th century, but various metals began thenceforth to be combined. Perhaps the choicest variety is gold graining in a shakudo field. By repeated hammering and polishing the expert obtains such control of the wood-grain pattern that its sinuosities and eddies seem to have developed symmetry without losing anything of their fantastic grace. There are other methods of producingmokume-ji.
It has been frequently asserted by Western critics that the year (1876) which witnessed the abolition of sword-wearing in Japan, witnessed also the end of her artistic metal-work. That is a great mistake. The art has merelyModern and Ancient Skill.developed new phases in modern times. Not only are its masters as skilled now as they were in the days of the Gotō, the Nara, the Yokoya and the Yanagawa celebrities, but also their productions must be called greater in many respects and more interesting than those of their renowned predecessors. They no longer devote themselves to the manufacture of sword ornaments, but work rather at vases, censers, statuettes, plaques, boxes and other objects of a serviceable or ornamental nature. All the processes described above are practised by them with full success, and they have added others quite as remarkable.
Of these, one of the most interesting is calledkiribame(insertion). The decorative design having been completely chiselled in the round, is then fixed in a field of a different metal, in which a design of exactly similar outline has been cut out. The result is that the picture has no blank reverse. For example, on the surface of a shibuichi box-lid we see the backs of a flock of geese chiselled in silver, and when the lid is opened, their breasts and the under-sides of their pinions appear. The difficulty of such work is plain. Microscopic accuracy has to be attained in cutting out the space for the insertion of the design, and while the latter must be soldered firmly in its place, not the slightest trace of solder or the least sign of junction must be discernible between the metal of the inserted picture and that of the field in which it is inserted. Suzuki Gensuke is the inventor of this method. He belongs to a class of experts calleduchimono-shi(hammerers) who perform preparatory work for glyptic artists in metal. The skill of these men is often wonderful. Using the hammer only, some of them can beat out an intricate shape as truly and delicately as a sculptor could carve it with his chisels. Ōhori Masatoshi, an uchimono-shi of Aizu (d. 1897), made a silver cake-box in the form of a sixteen-petalled chrysanthemum. The shapes of the body and lid corresponded so intimately that, whereas the lid could be slipped on easily and smoothly without any attempt to adjust its curves to those of the body, it always fitted so closely that the box could be lifted by grasping the lid only. Another feat of his was to apply a lining of silver to a shakudo box by shaping and hammering only, the fit being so perfect that the lining clung like paper to every part of the box. Suzuki Gensuke and Hirata Sōkō are scarcely less expert. The latter once exhibited in Tōkyō a silver game-cock with soft plumage and surface modelling of the most delicate character. It had been made by means of the hammer only. Suzuki’s kiribame process is not to be confounded with thekiribame-zōgan(inserted inlaying) of Tōyoda Kokō, also a modern artist. The gist of the latter method is that a design chiselledà jourhas its outlines veneered with other metal which serves to emphasize them. Thus, having pierced a spray of flowers in a thin sheet of shibuichi, the artist fits a slender rim of gold, silver or shakudo to the petals, leaves and stalks, so that an effect is produced of transparent blossoms outlined in gold, silver or purple. Another modern achievement—also due to Suzuki Gensuke—ismaze-gane(mixed metals). It is a singular conception, and the results obtained depend largely on chance. Shibuichi and shakudo are melted separately, and when they have cooled just enough not to mingle too intimately, they are cast into a bar which is subsequently beaten flat. The plate thus obtained shows accidental clouding, or massing of dark tones, and these patches are taken as the basis of a pictorial design to which final character is given by inlaying with gold and silver, and by katā-kiri sculpture. Such pictures partake largely of the impressionist character, but they attain much beauty in the hands of the Japanese artist with his extensiverépertoireof suggestive symbols. A process resembling maze-gane, but less fortuitous, isshibuichi-dōshi(combined shibuichi), which involves beating together two kinds of shibuichi and then adding a third variety, after which the details of the picture are worked in as in the case of maze-gane. The charm of these methods is that certain parts of the decorative design seem to float, not on the surface of the metal, but actually within it, an admirable effect of depth and atmosphere being thus produced. Mention must also be made of an extraordinarily elaborate and troublesome process invented by Kajima Ippu, a great artist of the present day. It is calledtogi-dashi-zōgan(ground-out inlaying). In this exquisite andingenious kind of work the design appears to be growing up from the depths of the metal, and a delightful impression of atmosphere and water is obtained. All these processes, as well as that ofrepoussé, in which the Japanese have excelled from a remote period, are now practised with the greatest skill in Tokyo, Kiōto, Osaka and Kanazawa. At the art exhibitions held twice a year in the principal cities there may be seen specimens of statuettes, alcove ornaments, and household utensils which show that the Japanese worker in metals stands more indisputably than ever at the head of the world’s artists in that field. The Occident does not yet appear to have full realized the existence of such talent in Japan; partly perhaps because its displays in former times were limited chiefly to sword-furniture, possessing little interest for the average European or American; and partly because the Japanese have not yet learned to adapt their skill to foreign requirements. They confine themselves at present to decorating plaques, boxes and cases for cigars or cigarettes, and an occasional tea or coffee service; but the whole domain of salvers, dessert-services, race-cups and so on remains virtually unexplored. Only within the past few years have stores been established in the foreign settlements for the sale of silver utensils, and already the workmanship on these objects displays palpable signs of the deterioration which all branches of Japanese art have undergone in the attempt to cater for foreign taste. In a general sense the European or American connoisseur is much less exacting than the Japanese. Broad effects of richness and splendour captivate the former, whereas the latter looks for delicacy of finish, accuracy of detail and, above all, evidences of artistic competence. It is nothing to a Japanese that a vase should be covered with profuse decoration of flowers and foliage: he requires that every blossom and every leaf shall be instinct with vitality, and the comparative costliness of fine workmanship does not influence his choice. But if the Japanese sculptor adopted such standards in working for foreign patrons, his market would be reduced to very narrow dimensions. He therefore adapts himself to his circumstances, and, using the mould rather than the chisel, produces specimens which snow tawdry handsomeness and are attractively cheap. It must be admitted, however, that even though foreign appreciative faculty were sufficiently educated, the Japanese artist in metals would still labour under the great difficulty of devising shapes to take the place of those which Europe and America have learned to consider classical.
Of these, one of the most interesting is calledkiribame(insertion). The decorative design having been completely chiselled in the round, is then fixed in a field of a different metal, in which a design of exactly similar outline has been cut out. The result is that the picture has no blank reverse. For example, on the surface of a shibuichi box-lid we see the backs of a flock of geese chiselled in silver, and when the lid is opened, their breasts and the under-sides of their pinions appear. The difficulty of such work is plain. Microscopic accuracy has to be attained in cutting out the space for the insertion of the design, and while the latter must be soldered firmly in its place, not the slightest trace of solder or the least sign of junction must be discernible between the metal of the inserted picture and that of the field in which it is inserted. Suzuki Gensuke is the inventor of this method. He belongs to a class of experts calleduchimono-shi(hammerers) who perform preparatory work for glyptic artists in metal. The skill of these men is often wonderful. Using the hammer only, some of them can beat out an intricate shape as truly and delicately as a sculptor could carve it with his chisels. Ōhori Masatoshi, an uchimono-shi of Aizu (d. 1897), made a silver cake-box in the form of a sixteen-petalled chrysanthemum. The shapes of the body and lid corresponded so intimately that, whereas the lid could be slipped on easily and smoothly without any attempt to adjust its curves to those of the body, it always fitted so closely that the box could be lifted by grasping the lid only. Another feat of his was to apply a lining of silver to a shakudo box by shaping and hammering only, the fit being so perfect that the lining clung like paper to every part of the box. Suzuki Gensuke and Hirata Sōkō are scarcely less expert. The latter once exhibited in Tōkyō a silver game-cock with soft plumage and surface modelling of the most delicate character. It had been made by means of the hammer only. Suzuki’s kiribame process is not to be confounded with thekiribame-zōgan(inserted inlaying) of Tōyoda Kokō, also a modern artist. The gist of the latter method is that a design chiselledà jourhas its outlines veneered with other metal which serves to emphasize them. Thus, having pierced a spray of flowers in a thin sheet of shibuichi, the artist fits a slender rim of gold, silver or shakudo to the petals, leaves and stalks, so that an effect is produced of transparent blossoms outlined in gold, silver or purple. Another modern achievement—also due to Suzuki Gensuke—ismaze-gane(mixed metals). It is a singular conception, and the results obtained depend largely on chance. Shibuichi and shakudo are melted separately, and when they have cooled just enough not to mingle too intimately, they are cast into a bar which is subsequently beaten flat. The plate thus obtained shows accidental clouding, or massing of dark tones, and these patches are taken as the basis of a pictorial design to which final character is given by inlaying with gold and silver, and by katā-kiri sculpture. Such pictures partake largely of the impressionist character, but they attain much beauty in the hands of the Japanese artist with his extensiverépertoireof suggestive symbols. A process resembling maze-gane, but less fortuitous, isshibuichi-dōshi(combined shibuichi), which involves beating together two kinds of shibuichi and then adding a third variety, after which the details of the picture are worked in as in the case of maze-gane. The charm of these methods is that certain parts of the decorative design seem to float, not on the surface of the metal, but actually within it, an admirable effect of depth and atmosphere being thus produced. Mention must also be made of an extraordinarily elaborate and troublesome process invented by Kajima Ippu, a great artist of the present day. It is calledtogi-dashi-zōgan(ground-out inlaying). In this exquisite andingenious kind of work the design appears to be growing up from the depths of the metal, and a delightful impression of atmosphere and water is obtained. All these processes, as well as that ofrepoussé, in which the Japanese have excelled from a remote period, are now practised with the greatest skill in Tokyo, Kiōto, Osaka and Kanazawa. At the art exhibitions held twice a year in the principal cities there may be seen specimens of statuettes, alcove ornaments, and household utensils which show that the Japanese worker in metals stands more indisputably than ever at the head of the world’s artists in that field. The Occident does not yet appear to have full realized the existence of such talent in Japan; partly perhaps because its displays in former times were limited chiefly to sword-furniture, possessing little interest for the average European or American; and partly because the Japanese have not yet learned to adapt their skill to foreign requirements. They confine themselves at present to decorating plaques, boxes and cases for cigars or cigarettes, and an occasional tea or coffee service; but the whole domain of salvers, dessert-services, race-cups and so on remains virtually unexplored. Only within the past few years have stores been established in the foreign settlements for the sale of silver utensils, and already the workmanship on these objects displays palpable signs of the deterioration which all branches of Japanese art have undergone in the attempt to cater for foreign taste. In a general sense the European or American connoisseur is much less exacting than the Japanese. Broad effects of richness and splendour captivate the former, whereas the latter looks for delicacy of finish, accuracy of detail and, above all, evidences of artistic competence. It is nothing to a Japanese that a vase should be covered with profuse decoration of flowers and foliage: he requires that every blossom and every leaf shall be instinct with vitality, and the comparative costliness of fine workmanship does not influence his choice. But if the Japanese sculptor adopted such standards in working for foreign patrons, his market would be reduced to very narrow dimensions. He therefore adapts himself to his circumstances, and, using the mould rather than the chisel, produces specimens which snow tawdry handsomeness and are attractively cheap. It must be admitted, however, that even though foreign appreciative faculty were sufficiently educated, the Japanese artist in metals would still labour under the great difficulty of devising shapes to take the place of those which Europe and America have learned to consider classical.
Bronze is called by the Japanesekara-kane, a term signifying “Chinese metal” and showing clearly the source from which knowledge of the alloy was obtained. It is a copper-lead-tin compound, the proportions of its constituentsBronze Casting.varying from 72 to 88% of copper, from 4 to 20% of lead and from 2 to 8% of tin. There are also present small quantities of arsenic and antimony, and zinc is found generally as a mere trace, but sometimes reaching to 6%. Gold is supposed to have found a place in ancient bronzes, but its presence has never been detected by analysis, and of silver not more than 2% seems to have been admitted at any time. Mr W. Gowland has shown that, whatever may have been the practice of Japanese bronze makers in ancient and medieval eras, their successors in later days deliberately introduced arsenic and antimony into the compound in order to harden the bronze without impairing its fusibility, so that it might take a sharper impression of the mould. Japanese bronze is well suited for castings, not only because of its low melting-point, great fluidity and capacity for taking sharp impressions, but also because it has a particularly smooth surface and readily develops a fine patina. One variety deserves special mention. It is a golden yellow bronze, calledsentoku—this being the Japanese pronunciation ofSuen-tē, the era of the Ming dynasty of China when this compound was invented. Copper, tin, lead and zinc, mixed in various proportions by different experts, are the ingredients, and the beautiful golden hues and glossy texture of the surface are obtained by patina-producing processes, in which branch of metal-work the Japanese show altogether unique skill.
From the time when they began to cast bronze statues, Japanese experts understood how to employ a hollow, removable core round which the metal was run in a skin just thick enough for strength without waste of material; and they also understood the use of wax for modelling purposes. In ordinary circumstances, a casting thus obtained took the form of a shell without any break of continuity. But for very large castings the process had to be modified. The great image of Lochana Buddha at Nara, for example, would measure 138 ft. in height were it standing erect, and its weight is about 550 tons. The colossal Amida at Kamakura has a height only 3 ft. less. It would have been scarcely possible to cast such statues in one piecein situ, or, if cast elsewhere, to transport them and elevate them on their pedestals. The plan pursued was to build them up gradually in their places by casting segment after segment. Thus, for the Nara Daibutsu, the mould was constructed in a series of steps ascending 12 in. at a time, until the head and neck were reached, which, of course, had to be cast in one shell, 12 ft. high.The term “parlour bronzes” serves to designate objects for domestic use, as flower-vases, incense-burners and alcove ornaments. Bronze-casters began to turn their attention to these objects about the middle of the 17th century. The art of casting bronze reached its culmination in the hands of a group of great experts—Seimin, Tōun, Masatune, Teijō, Sōmin, Keisai, Takusai, Gido, Zenryūsai and Hotokusai—who flourished during the second half of the 18th century and the first half of the 19th. Many brilliant specimens of these men’s work survive, their general features being that the motives are naturalistic, that the quality of the metal is exceptionally fine, that in addition to beautifully clear casting obtained by highly skilled use of thecera-perdutaprocess, the chisel was employed to impart delicacy and finish to the design, and that modelling in high relief is most successfully introduced. But it is a mistake to assert, as many have asserted, that after the era of the above ten masters—the latest of whom, Sōmin, ceased to work in 1871—no bronzes comparable with theirs were cast. Between 1875 and 1879 some of the finest bronzes ever produced in Japan were turned out by a group of experts working under the business name of Sanseisha. Started by two brothers, Oshima Katsujiro (art-name Jōun) and Oshima Yasutaro (art-name Shōkaku), this association secured the services of a number of skilled chisellers of sword-furniture, who had lost their occupation by the abandonment of sword-wearing. Nothing could surpass the delicacy of the works executed at the Sanseisha’s atelier in Tōkyō, but unfortunately such productions were above the standard of the customers for whom they were intended. Foreign buyers, who alone stood in the market at that time, failed to distinguish the fine and costly bronzes of Jōun, Shōkaku and their colleagues from cheap imitations which soon began to compete with them, so that ultimately the Sanseisha had to be closed. This page in the modern history of Japan’s bronzes needs little alteration to be true of her applied art in general. Foreign demand has shown so little discrimination that experts, finding it impossible to obtain adequate remuneration for first-class work, have been obliged to abandon the field altogether, or to lower their standard to the level of general appreciation, or by forgery to cater for the perverted taste which attaches unreasoning value to age. Jōun has produced, and is thoroughly capable of producing, bronzes at least equal to the best of Seimin’s masterpieces, yet he has often been induced to put Seimin’s name on objects for the sake of attracting buyers who attach more value to cachet than to quality. If to the names of Jōun and his brilliant pupil Ryūki we add those of Suzuki Chōkichi, Okazaki Sessei, Hasegawa Kumazō, Kanaya Gorosaburō and Jomi Eisuke, we have a group of modern bronze-casters who unquestionably surpass the ten experts beginning with Seimin and ending with Sōmin. Okazaki Sessei has successfully achieved the casting of huge panels carrying designs in high relief; and whether there is question of patina or of workmanship, Jōmi Eisuke has never been surpassed.Occidental influence has been felt, of course, in the field of modern bronze-casting. At a school of art officially established in Tōkyō in 1873 under the direction of Italian teachers—a school which owed its signal failure partly to the incompetence and intemperate behaviour of some of its foreign professors, and partly to a strong renaissance of pure Japanese classicism—one of the few accomplishments successfully taught was that of modelling in plaster and chiselling in marble after Occidental methods. Marble statues are out of place in the wooden buildings as well as in the parks of Japan, and even plaster busts or groups, though less incongruous perhaps, have not yet found favour. Hence the skill undoubtedly possessed by several graduates of the defunct art school has to be devoted chiefly to a subordinate purpose, namely, the fashioning of models for metal-casters. To this combination of modellers in European style and metal-workers of such force as Suzuki and Okazaki, Japan owes various memorial bronzes and effigies which are gradually finding a place in her parks, her museums, her shrines or her private houses. There is here little departure from the well-trodden paths of Europe. Studies in drapery, prancing steeds, ideal poses, heads with fragments of torsos attached (in extreme violation of true art), crouching beasts of prey—all the stereotyped styles are reproduced. The imitation is excellent.
From the time when they began to cast bronze statues, Japanese experts understood how to employ a hollow, removable core round which the metal was run in a skin just thick enough for strength without waste of material; and they also understood the use of wax for modelling purposes. In ordinary circumstances, a casting thus obtained took the form of a shell without any break of continuity. But for very large castings the process had to be modified. The great image of Lochana Buddha at Nara, for example, would measure 138 ft. in height were it standing erect, and its weight is about 550 tons. The colossal Amida at Kamakura has a height only 3 ft. less. It would have been scarcely possible to cast such statues in one piecein situ, or, if cast elsewhere, to transport them and elevate them on their pedestals. The plan pursued was to build them up gradually in their places by casting segment after segment. Thus, for the Nara Daibutsu, the mould was constructed in a series of steps ascending 12 in. at a time, until the head and neck were reached, which, of course, had to be cast in one shell, 12 ft. high.
The term “parlour bronzes” serves to designate objects for domestic use, as flower-vases, incense-burners and alcove ornaments. Bronze-casters began to turn their attention to these objects about the middle of the 17th century. The art of casting bronze reached its culmination in the hands of a group of great experts—Seimin, Tōun, Masatune, Teijō, Sōmin, Keisai, Takusai, Gido, Zenryūsai and Hotokusai—who flourished during the second half of the 18th century and the first half of the 19th. Many brilliant specimens of these men’s work survive, their general features being that the motives are naturalistic, that the quality of the metal is exceptionally fine, that in addition to beautifully clear casting obtained by highly skilled use of thecera-perdutaprocess, the chisel was employed to impart delicacy and finish to the design, and that modelling in high relief is most successfully introduced. But it is a mistake to assert, as many have asserted, that after the era of the above ten masters—the latest of whom, Sōmin, ceased to work in 1871—no bronzes comparable with theirs were cast. Between 1875 and 1879 some of the finest bronzes ever produced in Japan were turned out by a group of experts working under the business name of Sanseisha. Started by two brothers, Oshima Katsujiro (art-name Jōun) and Oshima Yasutaro (art-name Shōkaku), this association secured the services of a number of skilled chisellers of sword-furniture, who had lost their occupation by the abandonment of sword-wearing. Nothing could surpass the delicacy of the works executed at the Sanseisha’s atelier in Tōkyō, but unfortunately such productions were above the standard of the customers for whom they were intended. Foreign buyers, who alone stood in the market at that time, failed to distinguish the fine and costly bronzes of Jōun, Shōkaku and their colleagues from cheap imitations which soon began to compete with them, so that ultimately the Sanseisha had to be closed. This page in the modern history of Japan’s bronzes needs little alteration to be true of her applied art in general. Foreign demand has shown so little discrimination that experts, finding it impossible to obtain adequate remuneration for first-class work, have been obliged to abandon the field altogether, or to lower their standard to the level of general appreciation, or by forgery to cater for the perverted taste which attaches unreasoning value to age. Jōun has produced, and is thoroughly capable of producing, bronzes at least equal to the best of Seimin’s masterpieces, yet he has often been induced to put Seimin’s name on objects for the sake of attracting buyers who attach more value to cachet than to quality. If to the names of Jōun and his brilliant pupil Ryūki we add those of Suzuki Chōkichi, Okazaki Sessei, Hasegawa Kumazō, Kanaya Gorosaburō and Jomi Eisuke, we have a group of modern bronze-casters who unquestionably surpass the ten experts beginning with Seimin and ending with Sōmin. Okazaki Sessei has successfully achieved the casting of huge panels carrying designs in high relief; and whether there is question of patina or of workmanship, Jōmi Eisuke has never been surpassed.
Occidental influence has been felt, of course, in the field of modern bronze-casting. At a school of art officially established in Tōkyō in 1873 under the direction of Italian teachers—a school which owed its signal failure partly to the incompetence and intemperate behaviour of some of its foreign professors, and partly to a strong renaissance of pure Japanese classicism—one of the few accomplishments successfully taught was that of modelling in plaster and chiselling in marble after Occidental methods. Marble statues are out of place in the wooden buildings as well as in the parks of Japan, and even plaster busts or groups, though less incongruous perhaps, have not yet found favour. Hence the skill undoubtedly possessed by several graduates of the defunct art school has to be devoted chiefly to a subordinate purpose, namely, the fashioning of models for metal-casters. To this combination of modellers in European style and metal-workers of such force as Suzuki and Okazaki, Japan owes various memorial bronzes and effigies which are gradually finding a place in her parks, her museums, her shrines or her private houses. There is here little departure from the well-trodden paths of Europe. Studies in drapery, prancing steeds, ideal poses, heads with fragments of torsos attached (in extreme violation of true art), crouching beasts of prey—all the stereotyped styles are reproduced. The imitation is excellent.
Among the artists of early times it is often difficult to distinguish between the carver of wood and the caster of bronze. The latter sometimes made his own models in wax, sometimes chiselled them in wood, and sometimes hadCarving in Wood and Ivory.recourse to a specialist in wood-carving. The group of splendid sculptors in wood that graced the 11th, 12th and 13th centuries left names never to be forgotten, but undoubtedly many other artists of scarcely less force regarded bronze-casting as their principal business. Thus the story of wood-carving is very difficult to trace. Even in the field of architecturaldecoration for interiors, tradition tells us scarcely anything about the masters who carved such magnificent works as those seen in the Kiōto temples, the Tokugawa mausolea, and some of the old castles. There are, however, no modern developments of such work to be noted. The ability of former times exists and is exercised in the old way, though the field for its employment has been greatly narrowed.
Plate V.
SCULPTURE
Plate VI.
METAL WORK AND LACQUER
When Japanese sculpture in wood or ivory is spoken of, the first idea that presents itself is connected with the netsuke, which, of all the art objects found in Japan, is perhaps the most essentially Japanese. If Japan had given us nothingNetsuke Carvers.but the netsuke, we should still have no difficulty in differentiating the bright versatility of her national genius from the comparatively sombre, mechanic and unimaginative temperament of the Chinese. But the netsuke may now be said to be a thing of the past. Theinro(medicine-box), which it mainly served to fix in the girdle, has been driven out of fashion by the new civilization imported from the West, and artists who would have carved netsuke in former times now devote their chisels to statuettes and alcove ornaments. It is not to be inferred, however, though it is a favourite assertion of collectors, that no good netsuke have been made in modern times. That theory is based upon the fact that after the opening of the country to foreign intercourse in 1857, hundreds of inferior specimens of netsuke were chiselled by inexpert hands, purchased wholesale by treaty-port merchants, and sent to New York, London and Paris, where, though they brought profit to the exporter, they also disgusted the connoisseur and soon earned discredit for their whole class. But in fact the glyptic artists of Tōkyō, Osaka and Kiōto, though they now devote their chisels chiefly to works of more importance than the netsuke, are in no sense inferior to their predecessors of feudal days, and many beautiful netsuke bearing their signatures are in existence. As for the modern ivory statuette or alcove ornament, of which great numbers are now carved for the foreign market, it certainly stands on a plane much higher than the netsuke, since anatomical defects which escape notice in the latter owing to its diminutive size, become obtrusive in the former.One of the most remarkable developments of figure sculpture in modern Japan was due to Matsumoto Kisaburo (1830-1869). He carved human figures with as much accuracy as though they were destined for purposes of surgical demonstration.The Realistic Departure.Considering that this man had neither art education nor anatomical instruction, and that he never enjoyed an opportunity of studying from a model in a studio, his achievements were remarkable. He and the craftsmen of the school he established completely refute the theory that the anatomical solecisms commonly seen in the works of Japanese sculptors are due to faulty observation. Without scientific training of any kind Matsumoto and his followers produced works in which the eye of science cannot detect any error. But it is impossible to admit within the circle of high-art productions these wooden figures of everyday men and women, unrelieved by any subjective element, and owing their merit entirely to the fidelity with which their contours are shaped, their muscles modelled, and their anatomical proportions preserved. They have not even the attraction of being cleanly sculptured in wood, but are covered with thinly lacquered muslin, which, though doubtless a good preservative, accentuates their puppet-like character. Nevertheless, Matsumoto’s figures marked an epoch in Japanese wood sculpture. Their vivid realism appealed strongly to the taste of the average foreigner. A considerable school of carvers soon began to work in the Matsumoto style, and hundreds of their productions have gone to Europe and America, finding no market in Japan.Midway between the Matsumoto school and the pure style approved by the native taste in former times stand a number of wood-carvers headed by Takamura Kōun, who occupies in the field of sculpture much the same placeThe Semi-foreign School.as that held by Hashimoto Gaho in the realm of painting. Kōun carves figures in the round which not only display great power of chisel and breadth of style, but also tell a story not necessarily drawn from the motives of the classical school. This departure from established canons must be traced to the influence of the short-lived academy of Italian art established by the Japanese government early in the Meiji era. In the forefront of the new movement are to be found men like Yoneharu Unkai and Shinkai Taketarō; the former chiselled a figure of Jenner for the Medical Association of Japan when they celebrated the centenary of the great physician, and the latter has carved life-size effigies of two Imperial princes who lost their lives in the war with China (1894-95). The artists of the Kōun school, however, do much work which appeals to emotions in general rather than to individual memories. Thus Arakawa Reiun, one of Kōun’s most brilliant pupils, has exhibited a figure of a swordsman in the act of driving home a furious thrust. The weapon is not shown. Reiun sculptured simply a man poised on the toes of one foot, the other foot raised, the arm extended, and the body straining forward in strong yet elastic muscular effort. A more imaginative work by the same artist is a figure of a farmer who has just shot an eagle that swooped upon his grandson. The old man holds his bow still raised. Some of the eagle’s feathers, blown to his side, suggest the death of the bird; at his feet lies the corpse of the little boy, and the horror, grief and anger that such a tragedy would inspire are depicted with striking realism in the farmer’s face. Such work has very close affinities with Occidental conceptions. The chief distinguishing feature is that the glyptic character is preserved at the expense of surface finish. The undisguised touches of the chisel tell a story of technical force and directness which could not be suggested by perfectly smooth surfaces. To subordinate process to result is the European canon; to show the former without marring the latter is the Japanese ideal. Many of Kōun’s sculptures appear unfinished to eyes trained in Occidental galleries, whereas the Japanese connoisseur detects evidence of a technical feat in their seeming roughness.
When Japanese sculpture in wood or ivory is spoken of, the first idea that presents itself is connected with the netsuke, which, of all the art objects found in Japan, is perhaps the most essentially Japanese. If Japan had given us nothingNetsuke Carvers.but the netsuke, we should still have no difficulty in differentiating the bright versatility of her national genius from the comparatively sombre, mechanic and unimaginative temperament of the Chinese. But the netsuke may now be said to be a thing of the past. Theinro(medicine-box), which it mainly served to fix in the girdle, has been driven out of fashion by the new civilization imported from the West, and artists who would have carved netsuke in former times now devote their chisels to statuettes and alcove ornaments. It is not to be inferred, however, though it is a favourite assertion of collectors, that no good netsuke have been made in modern times. That theory is based upon the fact that after the opening of the country to foreign intercourse in 1857, hundreds of inferior specimens of netsuke were chiselled by inexpert hands, purchased wholesale by treaty-port merchants, and sent to New York, London and Paris, where, though they brought profit to the exporter, they also disgusted the connoisseur and soon earned discredit for their whole class. But in fact the glyptic artists of Tōkyō, Osaka and Kiōto, though they now devote their chisels chiefly to works of more importance than the netsuke, are in no sense inferior to their predecessors of feudal days, and many beautiful netsuke bearing their signatures are in existence. As for the modern ivory statuette or alcove ornament, of which great numbers are now carved for the foreign market, it certainly stands on a plane much higher than the netsuke, since anatomical defects which escape notice in the latter owing to its diminutive size, become obtrusive in the former.
One of the most remarkable developments of figure sculpture in modern Japan was due to Matsumoto Kisaburo (1830-1869). He carved human figures with as much accuracy as though they were destined for purposes of surgical demonstration.The Realistic Departure.Considering that this man had neither art education nor anatomical instruction, and that he never enjoyed an opportunity of studying from a model in a studio, his achievements were remarkable. He and the craftsmen of the school he established completely refute the theory that the anatomical solecisms commonly seen in the works of Japanese sculptors are due to faulty observation. Without scientific training of any kind Matsumoto and his followers produced works in which the eye of science cannot detect any error. But it is impossible to admit within the circle of high-art productions these wooden figures of everyday men and women, unrelieved by any subjective element, and owing their merit entirely to the fidelity with which their contours are shaped, their muscles modelled, and their anatomical proportions preserved. They have not even the attraction of being cleanly sculptured in wood, but are covered with thinly lacquered muslin, which, though doubtless a good preservative, accentuates their puppet-like character. Nevertheless, Matsumoto’s figures marked an epoch in Japanese wood sculpture. Their vivid realism appealed strongly to the taste of the average foreigner. A considerable school of carvers soon began to work in the Matsumoto style, and hundreds of their productions have gone to Europe and America, finding no market in Japan.
Midway between the Matsumoto school and the pure style approved by the native taste in former times stand a number of wood-carvers headed by Takamura Kōun, who occupies in the field of sculpture much the same placeThe Semi-foreign School.as that held by Hashimoto Gaho in the realm of painting. Kōun carves figures in the round which not only display great power of chisel and breadth of style, but also tell a story not necessarily drawn from the motives of the classical school. This departure from established canons must be traced to the influence of the short-lived academy of Italian art established by the Japanese government early in the Meiji era. In the forefront of the new movement are to be found men like Yoneharu Unkai and Shinkai Taketarō; the former chiselled a figure of Jenner for the Medical Association of Japan when they celebrated the centenary of the great physician, and the latter has carved life-size effigies of two Imperial princes who lost their lives in the war with China (1894-95). The artists of the Kōun school, however, do much work which appeals to emotions in general rather than to individual memories. Thus Arakawa Reiun, one of Kōun’s most brilliant pupils, has exhibited a figure of a swordsman in the act of driving home a furious thrust. The weapon is not shown. Reiun sculptured simply a man poised on the toes of one foot, the other foot raised, the arm extended, and the body straining forward in strong yet elastic muscular effort. A more imaginative work by the same artist is a figure of a farmer who has just shot an eagle that swooped upon his grandson. The old man holds his bow still raised. Some of the eagle’s feathers, blown to his side, suggest the death of the bird; at his feet lies the corpse of the little boy, and the horror, grief and anger that such a tragedy would inspire are depicted with striking realism in the farmer’s face. Such work has very close affinities with Occidental conceptions. The chief distinguishing feature is that the glyptic character is preserved at the expense of surface finish. The undisguised touches of the chisel tell a story of technical force and directness which could not be suggested by perfectly smooth surfaces. To subordinate process to result is the European canon; to show the former without marring the latter is the Japanese ideal. Many of Kōun’s sculptures appear unfinished to eyes trained in Occidental galleries, whereas the Japanese connoisseur detects evidence of a technical feat in their seeming roughness.
Architecture.—From the evidence of ancient records it appears that before the 5th century the Japanese resided in houses of a very rude character. The sovereign’s palace itself was merely a wooden hut. Its pillars were thrustPrivate Dwellings.into the ground and the whole framework—consisting of posts, beams, rafters, door-posts and window-frames—was tied together with cords made by twisting the long fibrous stems of climbing plants. The roof was thatched, and perhaps had a gable at each end with a hole to allow the smoke of the wood fire to escape. Wooden doors swung on a kind of hook; the windows were mere holes in the walls. Rugs of skins or rush matting were used for sitting on, and the whole was surrounded with a palisade. In the middle of the 5th century two-storeyed houses seem to have been built, but the evidence on the subject is slender. In the 8th century, however, when the court was moved to Nara, the influence of Chinese civilization made itself felt. Architects, turners, tile-makers, decorative artists and sculptors, coming from China and from Korea, erected grand temples for the worship of Buddha enshrining images of much beauty and adorned with paintings and carvings of considerable merit. The plan of the city itself was taken from that of the Chinese metropolis. A broad central avenue led straight to the palace, and on either side of it ran four parallel streets, crossed at right angles by smaller thoroughfares. During this century the first sumptuary edict ordered that the dwellings of all high officials and opulent civilians should have tiled roofs and be coloured red, the latter injunction being evidently intended to stop the use of logs carrying their bark. Tiles thenceforth became the orthodox covering for a roof, but vermilion, being regarded as a religious colour, found no favour in private dwellings. In the 9th century, after the capital had been established at Kiōto, the palace of the sovereigns and the mansions of ministers and nobles were built on a scale of unprecedented grandeur. It is true that all the structures of the time had the defect of a box-like appearance. Massive, towering roofs, which impart an air of stateliness even to a wooden building and yet, by their graceful curves, avoid any suggestion of ponderosity, were still confined to Buddhist edifices. The architect of private dwellings attached more importance to satin-surfaced boards and careful joinery than to any appearance of strength or solidity.