A knowledge of Arithmetic is indispensable to every one. The merchant, the workman, the engineer, all need to know how to calculate with rapidity and precision. The useful character of arithmetic indicates that its methods should admit of great simplicity, and that its teaching should be most carefully freed from all needless complication. When we enter into the spirit of the methods of arithmetic, we perceive that they all flow clearly and simply from the very principles of numeration, from some precise definitions, and from certain ideas of relations between numbers, which all minds easily perceive, and which they even possessed in advance, before their teacher made them recognize them and taught them to class them in a methodical and fruitful order. We therefore believe that there is no one who is not capable of receiving, of understanding, and of enjoying well-arranged and well-digested arithmetical instruction.
But the great majority of those who have received a liberal education do not possess this useful knowledge. Their minds, they say, are not suited to the study of mathematics. They have found it impossible to bend themselves to the study of those abstract sciences whose barrenness and dryness form so striking a contrast to the attractions of history, and the beauties of style and of thought in the great poets; and so on.
Now, without admitting entirely the justice of this language, we do not hesitate to acknowledge, that the teaching of elementary mathematics has lost its former simplicity, and assumed a complicated and pretentious form, which possesses no advantages and is full of inconveniences. The reproach which is cast upon the sciences in themselves, we out-and-out repulse, and apply it only to the vicious manner in which they are now taught.
Arithmetic especially is only an instrument, a tool, the theory of which we certainly ought to know, but the practice of which it is above all important most thoroughly to possess. The methods of analysis and of mechanics, invariably lead to solutions whose applications require reduction into numbers by arithmetical calculations. We may add that the numerical determination of the final result is almost always indispensable to the clear and complete comprehension of a method ever so little complicated. Such an application, either by the more complete condensation of the ideas which it requires, or by its fixing the mind on the subject more precisely and clearly, develops a crowd of remarks which otherwise would not have been made, and it thus contributes to facilitate the comprehension of theories in such an efficacious mannerthat the time given to the numerical work is more than regained by its being no longer necessary to return incessantly to new explanations of the same method.
The teaching of arithmetic will therefore have for its essential object, to make the pupils acquire the habit of calculation, so that they may be able to make an easy and continual use of it in the course of their studies. The theory of the operations must be given to them with clearness and precision; not only that they may understand the mechanism of those operations, but because, in almost all questions, the application of the methods calls for great attention and continual discussion, if we would arrive at a result in which we can confide. But at the same time every useless theory must be carefully removed, so as not to distract the attention of the pupil, but to devote it entirely to the essential objects of this instruction.
It may be objected that these theories are excellent exercises to form the mind of the pupils. We answer that such an opinion may be doubted for more than one reason, and that, in any case, exercises on useful subjects not being wanting in the immense field embraced by mathematics, it is quite superfluous to create, for the mere pleasure of it, difficulties which will never have any useful application.
Another remark we think important. It is of no use to arrive at a numerical result, if we cannot answer for its correctness. The teaching of calculation should include, as an essential condition, that the pupils should be shown how every result, deduced from a series of arithmetical operations, may always be controlled in such a way that we may have all desirable certainty of its correctness; so that, though a pupil may and must often make mistakes, he may be able to discover them himself, to correct them himself, and never to present, at last, any other than an exact result.
TheProgrammegiven below is made very minute to avoid the evils which resulted from the brevity of the old one. In it, the limits of the matter required not being clearly defined, each teacher preferred to extend them excessively, rather than to expose his pupils to the risk of being unable to answer certain questions. The examiners were then naturally led to put the questions thus offered to them, so to say; and thus the preparatory studies grew into excessive and extravagant development. These abuses could be remedied only by the publication of programmes so detailed, that the limits within which the branches required for admission must be restricted should be so apparent to the eyes of all, as to render it impossible for the examiners to go out of them, and thus to permit teachers to confine their instruction within them.
The new programme for arithmetic commences with the words Decimal numeration. This is to indicate that the Duodecimal numeration will not be required.
The only practical verification of Addition and Multiplication, is to recommence these operations in a different order.
The Division of whole numbers is the first question considered at all difficult. This difficulty arises from the complication of the methods by which division is taught. In some books its explanation contains twice as many reasons as is necessary. The mind becomes confused by such instruction, and no longer understands what is a demonstration, when it sees it continued at the moment when it appeared to be finished. In most cases the demonstration is excessively complicated and does not follow the same order as the practical rule, to which it is then necessary to return. There lies the evil, and it is real and profound.
The phrase of the programme, Division of whole numbers, intends that the pupil shall be required to explain the practical rule, and be able to use it in a familiar and rapid manner. We do not present any particular mode of demonstration, but, to explain our views, we will indicate how we would treat the subject if we were making the detailed programme of acourseof arithmetic, and not merely that of anexamination. It would be somewhat thus:
“The quotient may be found by addition, subtraction, multiplication;
“Division of a number by a number of one figure, when the quotient is less than 10;
“Division of any number by a number less than 10;
“Division of any two numbers when the quotient has only one figure;
“Division in the most general case.
“Note.—The practical rule may be entirely explained by this consideration, that by multiplying the divisor by different numbers, we see if the quotient is greater or less than the multiplier.”
“Note.—The practical rule may be entirely explained by this consideration, that by multiplying the divisor by different numbers, we see if the quotient is greater or less than the multiplier.”
The properties of the Divisors of numbers, and the decomposition of a number into prime factors should be known by the student. But here also we recommend simplicity. The theory of the greatest common divisor, for example, has no need to be given with all the details with which it is usually surrounded, for it is of no use in practice.
The calculation of Decimal numbers is especially that in which it is indispensable to exercise students. Such are the numbers on which they will generally have to operate. It is rare that the data of a question are whole numbers; usually they are decimal numbers which are not even known with rigor, but only with a given decimal approximation; and the result which is sought is to deduce from these, other decimal numbers, themselves exact to a certain degree of approximation,fixed by the conditions of the problem. It is thus that this subject should be taught. The pupil should not merely learn how, in one or two cases, he can obtain a result to within 1/n,nbeing any number, but how to arrive by a practicable route to results which are exact to within a required decimal, and on the correctness of which they can depend.
Let us take decimal multiplication for an example. Generally the pupils do not know any other rule than “to multiply one factor by the other, without noticing the decimal point, except to cut off on the right of the product as many decimal figures as there are in the two factors.” The rule thus enunciated is methodical, simple, and apparently easy. But, in reality, it is practically of a repulsive length, and is most generally inapplicable.
Let us suppose that we have to multiply together two numbers having each six decimals, and that we wish to know the product also to the sixth decimal. The above rule will give twelve decimals, the last six of which, being useless, will have caused by their calculation the loss of precious time. Still farther; when a factor of a product is given with six decimals, it is because we have stopped in its determination at that degree of approximation, neglecting the following decimals; whence it results that several of the decimals situated on the right of the calculated product are not those which would belong to the rigorous product. What then is the use of taking the trouble of determining them?
We will remark lastly that if the factors of the product are incommensurable, and if it is necessary to convert them into decimals before effecting the multiplication, we should not know how far we should carry the approximation of the factors before applying the above rule. It will therefore be necessary to teach the pupils the abridged methods by which we succeed, at the same time, in using fewer figures and in knowing the real approximation of the result at which we arrive.
Periodical decimal fractions are of no use. The two elementary questions of the programme are all that need be known about them.
The Extraction of the square root must be given very carefully, especially that of decimal numbers. It is quite impossible here to observe the rule of having in the square twice as many decimals as are required in the root. That rule is in fact impracticable when a series of operations is to be effected. “When a number N increases by a comparatively small quantityd, the square of that number increases very nearly as 2Nd.” It is thus that we determine the approximation with which a number must be calculated so that its square root may afterwards be obtained with the necessary exactitude. This supposes that before determining the square with all necessary precision, we have asuitable lower limit of the value of the root, which can always be done without difficulty.
The Cube root is included in the programme. The pupils should know this; but while it will be necessary to exercise them on the extraction of the square root by numerous examples, we should be very sparing of this in the cube root, and not go far beyond the mere theory. The calculations become too complicated and waste too much time. Logarithms are useful even for the square root; and quite indispensable for the cube root, and still more so for higher roots.
When a question contains only quantities which vary in the same ratio, or in an inverse ratio, it is immediately resolved by a very simple method, known under the name ofreduction to unity. The result once obtained, it is indispensable to make the pupils remark that it is composed of the quantity which, among the data, is of the nature of that which is sought, multiplied successively by a series of abstract ratios between other quantities which also, taken two and two, are of the same nature. Hence flows the rule for writing directly the required result, without being obliged to take up again for each question the series of reasonings. This has the advantage, not only of saving time, but of better showing the spirit of the method, of making clearer the meaning of the solution, and of preparing for the subsequent use of formulas. The consideration of “homogeneity” conduces to these results.
We recommend teachers to abandon as much as possible the use of examples in abstract numbers, and of insignificant problems, in which the data, taken at random, have no connection with reality. Let the examples and the exercises presented to students always relate to objects which are found in the arts, in industry, in nature, in physics, in the system of the world. This will have many advantages. The precise meaning of the solutions will be better grasped. The pupils will thus acquire, without any trouble, a stock of precise and precious knowledge of the world which surrounds them. They will also more willingly engage in numerical calculations, when their attention is thus incessantly aroused and sustained, and when the result, instead of being merely a dry number, embodies information which is real, useful, and interesting.
The former arithmetical programme included the theory ofprogressionsandlogarithms; the latter being deduced from the former. But the theory of logarithms is again deduced in algebra from exponents, much the best method. This constitutes an objectionable “double emploi.” There is finally no good reason for retaining these theories in arithmetic.
The programme retains the questions which can be solved by making two arbitrary and successive hypotheses on the desired result. It is truethat these questions can be directly resolved by means of a simple equation of the first degree; but we have considered that, since the resolution of problems by means of hypotheses, constitutes the most fruitful method really used in practice, it is well to accustom students to it the soonest possible. This is the more necessary, because teachers have generally pursued the opposite course, aiming especially to give their pupils direct solutions, without reflecting that the theory of these is usually much more complicated, and that the mind of the learner thus receives a direction exactly contrary to that which it will have to take in the end.
“Proportions” remain to be noticed.
In most arithmetics problems are resolved first by the method of “reduction to unity,” and then by the theory of proportions. But beside the objection of the “double emploi,” it is very certain that the method of reduction to unity presents, in their true light and in a complete and simple manner, all the questions of ratio which are the bases of arithmetical solutions; so that the subsequent introduction of proportions teaches nothing new to the pupils, and only presents the same thing in a more complicated manner. We therefore exclude from our programme of examination the solution of questions of arithmetic, presented under the special form which constitutes the theory of proportions.
This special form we would be very careful not to invent, if it had not already been employed. Why not say simply “The ratio of M to N is equal to that of P to Q,” instead of hunting for this other form of enunciating the same idea, “Mis toNasPis toQ”? It is in vain to allege the necessities of geometry; if we consider all the questions in which proportions are used, we shall see that the simple consideration of the equality of ratios is equally well adapted to the simplicity of the enunciation and the clearness of the demonstrations. However, since all the old books of geometry make use of proportions, we retain the properties of proportions at the end of our programme; but with this express reserve, that the examiners shall limit themselves to the simple properties which we indicate, and that they shall not demand any application of proportions to the solution of arithmetical problems.
PROGRAMME OF ARITHMETIC.
Decimal numeration.Addition and subtraction of whole numbers.Multiplication of whole numbers.—Table of Pythagoras.—The product of several whole numbers does not change its value, in whatever order the multiplications are effected.—To multiply a number by the product of several factors, it is sufficient to multiply successively by the factors of the product.Division of whole numbers.—To divide a number by the product of several factors, it is sufficient to divide successively by the factors of the product.Remainders from dividing a whole number by 2, 3, 5, 9, and 11.—Applications to the characters of divisibility by one of those numbers; to the verification of the product of several factors; and to the verification of the quotient of two numbers.Prime numbers. Numbers prime to one another.To find the greatest common divisor of two numbers.—If a number divides a product of two factors, and if it is prime to one of the factors, it divides the other.—To decompose a number into its prime factors.—To determine the smallest number divisible by given numbers.Vulgar fractions.A fraction does not alter in value when its two terms are multiplied or divided by the same number. Reduction of a fraction to its simplest expression. Reduction of several fractions to the same denominator. Reduction to the smallest common denominator.—To compare the relative values of several fractions.Addition and subtraction of fractions.—Multiplication. Fractions of fractions.—Division.Calculation of numbers composed of an entire part and a fraction.Decimal numbers.Addition and subtraction.Multiplication and division.—How to obtain the product of the quotient to within a unit of any given decimal order.To reduce a vulgar fraction to a decimal fraction.—When the denominator of an irreducible fraction contains other factors than 2 and 5, the fraction cannot be exactly reduced to decimals; and the quotient, which continues indefinitely, is periodical.To find the vulgar fraction which generates a periodical decimal fraction: 1owhen the decimal fraction is simply periodical; 2owhen it contains a part not periodical.System of the new measures.Linear Measures.—Measures of surface.—Measures of volume and capacity.—Measures of weight.—Moneys.—Ratios of the principal foreign measures (England, Germany, United States of America) to the measures of France.Of ratios. Resolution of problems.General notions on quantities which vary in the same ratio or in an inverse ratio.—Solution, by the method calledReduction to unity, of the simplest questions in which such quantities are considered.—To show the homogeneity of the results which are arrived at; thence to deduce the general rule for writing directly the expression of the required solution.Simple interest.—General formula, the consideration of which furnishes the solution of questions relating to simple interest.—Of discount, as practised in commerce.To divide a sum into parts proportional to given numbers.Of questions which can be solved by two arbitrary and successive hypotheses made on the desired result.Of the square and of the square root. Of the cube and of the cube root.Formation of the square and the cube of the sum of two numbers.—Rules for extracting the square root and the cube root of a whole number.—If this root is not entire, it cannot be exactly expressed by any number, and is called incommensurable.Square and cube of a fraction.—Extraction of the square root and cube root of vulgar fractions.Any number being given, either directly, or by a series of operations which permit only an approximation to its value by means of decimals, how to extract the square root or cube root of that number, to within any decimal unit.Of the proportions called geometrical.In every proportion the product of the extremes is equal to the product of the means.—Reciprocal proportion.—Knowing three terms of a proportion to find the fourth.—Geometrical mean of two numbers.—How the order of the terms of a proportion can be inverted without disturbing the proportion.When two proportions have a common ratio, the two other ratios form a proportion.In any proportion, each antecedent may be increased or diminished by its consequent without destroying the proportion.When the corresponding terms of several proportions are multiplied together, the four products form a new proportion.—The same powers or the same roots of four numbers in proportion form a new proportion.In a series of equal ratios, the sum of any number of antecedents and the sum of their consequents are still in the same ratio.
Decimal numeration.
Addition and subtraction of whole numbers.
Multiplication of whole numbers.—Table of Pythagoras.—The product of several whole numbers does not change its value, in whatever order the multiplications are effected.—To multiply a number by the product of several factors, it is sufficient to multiply successively by the factors of the product.
Division of whole numbers.—To divide a number by the product of several factors, it is sufficient to divide successively by the factors of the product.
Remainders from dividing a whole number by 2, 3, 5, 9, and 11.—Applications to the characters of divisibility by one of those numbers; to the verification of the product of several factors; and to the verification of the quotient of two numbers.
Prime numbers. Numbers prime to one another.
To find the greatest common divisor of two numbers.—If a number divides a product of two factors, and if it is prime to one of the factors, it divides the other.—To decompose a number into its prime factors.—To determine the smallest number divisible by given numbers.
Vulgar fractions.
A fraction does not alter in value when its two terms are multiplied or divided by the same number. Reduction of a fraction to its simplest expression. Reduction of several fractions to the same denominator. Reduction to the smallest common denominator.—To compare the relative values of several fractions.
Addition and subtraction of fractions.—Multiplication. Fractions of fractions.—Division.
Calculation of numbers composed of an entire part and a fraction.
Decimal numbers.
Addition and subtraction.
Multiplication and division.—How to obtain the product of the quotient to within a unit of any given decimal order.
To reduce a vulgar fraction to a decimal fraction.—When the denominator of an irreducible fraction contains other factors than 2 and 5, the fraction cannot be exactly reduced to decimals; and the quotient, which continues indefinitely, is periodical.
To find the vulgar fraction which generates a periodical decimal fraction: 1owhen the decimal fraction is simply periodical; 2owhen it contains a part not periodical.
System of the new measures.
Linear Measures.—Measures of surface.—Measures of volume and capacity.—Measures of weight.—Moneys.—Ratios of the principal foreign measures (England, Germany, United States of America) to the measures of France.
Of ratios. Resolution of problems.
General notions on quantities which vary in the same ratio or in an inverse ratio.—Solution, by the method calledReduction to unity, of the simplest questions in which such quantities are considered.—To show the homogeneity of the results which are arrived at; thence to deduce the general rule for writing directly the expression of the required solution.
Simple interest.—General formula, the consideration of which furnishes the solution of questions relating to simple interest.—Of discount, as practised in commerce.
To divide a sum into parts proportional to given numbers.
Of questions which can be solved by two arbitrary and successive hypotheses made on the desired result.
Of the square and of the square root. Of the cube and of the cube root.
Formation of the square and the cube of the sum of two numbers.—Rules for extracting the square root and the cube root of a whole number.—If this root is not entire, it cannot be exactly expressed by any number, and is called incommensurable.
Square and cube of a fraction.—Extraction of the square root and cube root of vulgar fractions.
Any number being given, either directly, or by a series of operations which permit only an approximation to its value by means of decimals, how to extract the square root or cube root of that number, to within any decimal unit.
Of the proportions called geometrical.
In every proportion the product of the extremes is equal to the product of the means.—Reciprocal proportion.—Knowing three terms of a proportion to find the fourth.—Geometrical mean of two numbers.—How the order of the terms of a proportion can be inverted without disturbing the proportion.
When two proportions have a common ratio, the two other ratios form a proportion.
In any proportion, each antecedent may be increased or diminished by its consequent without destroying the proportion.
When the corresponding terms of several proportions are multiplied together, the four products form a new proportion.—The same powers or the same roots of four numbers in proportion form a new proportion.
In a series of equal ratios, the sum of any number of antecedents and the sum of their consequents are still in the same ratio.
Some knowledge of Geometry is, next to arithmetic, most indispensable to every one, and yet very few possess even its first principles. This is the fault of the common system of instruction. We do not pay sufficient regard to the natural notions about straight lines, angles, parallels, circles, etc., which the young have acquired by looking around them, and which their minds have unconsciously considered before making them a regular study. We thus waste time in giving a dogmatic form to truths which the mind seizes directly.
The illustriousClairautcomplains of this, and of the instruction commencing always with a great number of definitions, postulates, axioms, and preliminary principles, dry and repulsive, and followed by propositions equally uninteresting. He also condemns the profusion of self-evident propositions, saying, “It is not surprising that Euclid should give himself the trouble to demonstrate that two circles which intersect have not the same centre; that a triangle situated within another has the sum of its sides smaller than that of the sides of the triangle which contains it; and so on. That geometer had to convince obstinate sophists, who gloried in denying the most evident truths. It was therefore necessary that geometry, like logic, should then have the aid of formal reasonings, to close the mouths of cavillers; but in our day things have changed face; all reasoning about what mere good sense decides in advance is now a pure waste of time, and is fitted, only to obscure the truth and to disgust the reader.”
Bezoutalso condemns the multiplication of the number of theorems, propositions, and corollaries; an array which makes the student dizzy, and amid which he is lost. All that follows from a principle should be given in natural language as far as possible, avoiding the dogmatic form. It is true that some consider the works of Bezout deficient in rigor, but he knew better than any one what really was a demonstration. Nor do we find in the works of the great old masters less generality of views, less precision, less clearness of conception than in modern treatises. Quite the contrary indeed.
We see this in Bezout’sdefinition of a right line—that it tends continually towards one and the same point; and in that ofa curved line—that it is the trace of a moving point, which turns aside infinitely little at each step of its progress; definitions most fruitful in consequences. When we define a right line as the shortest path from one point to another, we enunciate a property of that line which is of no use for demonstrations. When we define a curved line as one which is neither straightnor composed of straight lines, we enunciate two negations which can lead to no result, and which have no connection with the peculiar nature of the curved line. Bezout’s definition, on the contrary, enters into the nature of the object to be defined, seizes its mode of being, its character, and puts the reader immediately in possession of the general idea from which are afterwards deduced the properties of curved lines and the construction of their tangents.
So too when Bezout says that, in order to form an exact idea of an angle, it is necessary to consider the movement of a line turning around one of its points, he gives an idea at once more just and more fruitful in consequences, both mathematical and mechanical, than that which is limited to saying, that the indefinite space comprised between two straight lines which meet in a point, and which may be regarded as prolonged indefinitely, is called anangle; a definition not very easily comprehended and absolutely useless for ulterior explanations, while that of Bezout is of continual service.
We therefore urge teachers to return, in their demonstrations, to the simplest ideas, which are also the most general; to consider a demonstration as finished and complete when it has evidently caused the truth to enter into the mind of the pupil, and to add nothing merely for the sake of silencing sophists.
Referring to our Programme of Geometry, given below, our first comments relate to the “Theory of parallels.” This is a subject on which all students fear to be examined; and this being a general feeling, it is plain that it is not their fault, but that of the manner in which this subject is taught. The omission of the natural idea of the constant direction of the right line (as defined by Bezout) causes the complication of the first elements; makes it necessary for Legendre to demonstrate that all right angles are equal (a proposition whose meaning is rarely understood); and is the real source of all the pretended difficulties of the theory of parallels. These difficulties are now usually avoided by the admission of apostulate, after the example of Euclid, and to regulate the practice in that matter, we have thought proper to prescribe that this proposition—Through a given point only a single parallel to a right line can be drawn—should be admitted purely and simply, without demonstration, and as a direct consequence of our idea of the nature of the right line.
We should remark that the order of ideas in our programme supposes the properties of lines established without any use of the properties of surfaces. We think that, in this respect, it is better to follow Lacroix than Legendre.
When we prove thus that three parallels always divide two right lines into proportional parts, this proposition can be extended to the case in which the ratio of the parts is incommensurable, either by the method calledReductio ad absurdum, or by the method ofLimits. We especially recommend the use of the latter method. The former has in fact nothing which satisfies the mind, and we should never have recourse to it, for it is always possible to do without it. When we have proved to the pupil that a desired quantity, X, cannot be either larger or smaller than A, the pupil is indeed forced to admit that X and A are equal; but that does not make him understand or feel why that equality exists. Now those demonstrations which are of such a nature that, once given, they disappear, as it were, so as to leave to the proposition demonstrated the character of a truth evidentà priori, are those which should be carefully sought for, not only because they make that truth better felt, but because they better prepare the mind for conceptions of a more elevated order. The method of limits, is, for a certain number of questions, the only one which possesses this characteristic—that the demonstration is closely connected with the essential nature of the proposition to be established.
In reference to the relations which exist between the sides of a triangle and the segments formed by perpendiculars let fall from the summits, we will, once for all, recommend to the teacher, to exercise his students in making numerical applications of relations of that kind, as often as they shall present themselves in the course of geometry. This is the way to cause their meaning to be well understood, to fix them in the mind of students, and to give these the exercise in numerical calculation to which we positively require them to be habituated.
The theory of similar figures has a direct application in the art of surveying for plans (Lever des plans). We wish that this application should be given to the pupils in detail; that they should be taught to range out and measure a straight line on the ground; that a graphometer should be placed in their hands; and that they should use it and the chain to obtain on the ground, for themselves, all the data necessary for the construction of a map, which they will present to the examiners with the calculations in the margins.
It is true that a more complete study of this subject will have to be subsequently made by means of trigonometry, in which calculation will give more precision than these graphical operations. But some pupils may fail to extend their studies to trigonometry (the course given for the Polytechnic school having become the model for general instruction in France), and those who do will thus learn that trigonometry merely gives means of more precise calculation. This application will also bean encouragement to the study of a science whose utility the pupil will thus begin to comprehend.
It is common to say that an angle is measured by the arc of a circle, described from its summit or centre, and intercepted between its sides. It is true that teachers add, that since a quantity cannot be measured except by one of the same nature, and since the arc of a circle is of a different nature from an angle, the preceding enunciation is only an abridgment of the proposition by which we find the ratio of an angle to a right angle. Despite this precaution, the unqualified enunciation which precedes, causes uncertainty in the mind of the pupil, and produces in it a lamentable confusion. We will say as much of the following enunciations: “A dihedral angle is measured by the plane angle included between its sides;” “The surface of a spherical triangle is measured by the excess of the sum of its three angles above two right angles,” etc.; enunciations which have no meaning in themselves, and from which every trace of homogeneity has disappeared. Now that everybody is requiring that the students of the Polytechnic school should better understand the meaning of the formulas which they are taught, which requires that their homogeneity should always be apparent, this should be attended to from the beginning of their studies, in geometry as well as in arithmetic. The examiners must therefore insist that the pupils shall never give them any enunciations in which homogeneity is not preserved.
The proportionality of the circumferences of circles to their radii must be inferreddirectlyfrom the proportionality of the perimeters of regular polygons, of the same number of sides, to their apothems. In like manner, from the area of a regular polygon being measured by half of the product of its perimeter by the radius of the inscribed circle, it must bedirectlyinferred that the area of a circle is measured by half of the product of its circumference by its radius. For a long time, these properties of the circle were differently demonstrated by proving, for example, with Legendre, that the measure of the circle could not be either smaller or greater than that which we have just given, whence it had to be inferred that it must be equal to it. The “Council of improvement” finally decided that this method should be abandoned, and that the method of limits should alone be admitted, in the examinations, for demonstrations of this kind. This was a true advance, but it was not sufficient. It did not, as it should, go on to consider the circle, purely and simply, as the limit of a series of regular polygons, the number of whose sides goes on increasing to infinity, and to regard the circle as possessing every property demonstrated for polygons. Instead of this, they inscribed and circumscribed to the circle two polygons of the same number of sides, andproved that, by the multiplication of the number of the sides of these polygons, the difference of their areas might become smaller than any given quantity, and thence, finally, deduced the measure of the area of the circle; that is to say, they took away from the method of limits all its advantage as to simplicity, by not applying itfrankly.
We now ask that this shall cease; and that we shall no longer reproach for want of rigor, the Lagranges, the Laplaces, the Poissons, and Leibnitz, who has given us this principle: that “A curvilinear figure may be regarded as equivalent to a polygon of an infinite number of sides; whence it follows that whatsoever can be demonstrated of such a polygon, no regard being paid to the number of its sides, the same may be asserted of the curve.” This is the principle forthe most simpleapplication of which to the measure of the circle and of the round bodies we appeal.
Whatever may be the formulas which may be given to the pupils for the determination of the ratio of the circumference to the diameter (the “Method of isoperimeters” is to be recommended for its simplicity), they must be required to perform the calculation, so as to obtain at least two or three exact decimals. These calculations, made with logarithms, must be methodically arranged and presented at the examination. It may be known whether the candidate is really the author of the papers, by calling for explanations on some of the steps, or making him calculate some points afresh.
The enunciations relating to the measurement of areas too often leave indistinctness in the minds of students, doubtless because of their form. We desire to make them better comprehended, by insisting on their application by means of a great number of examples.
As one application, we require the knowledge of the methods of surveying for content (arpentage), differing somewhat from the method of triangulation, used in the surveying for plans (lever des plans). To make this application more fruitful, the ground should be bounded on one side by an irregular curve. The pupils will not only thus learn how to overcome this practical difficulty, but they will find, in the calculation of the surface by means of trapezoids, the first application of the method of quadratures, with which it is important that they should very early become familiar. This application will constitute a new sheet of drawing and calculations to be presented at the examination.
Most of our remarks on plane geometry apply to geometry of three dimensions. Care should be taken always to leave homogeneity apparent and to make numerous applications to the measurement of volumes.
The theory of similar polyhedrons often gives rise in the examination of the students to serious difficulties on their part. These difficultiesbelong rather to the form than to the substance, and to the manner in which each individual mind seizes relations of position; relations always easier to feel than to express. The examiners should be content with arriving at the results enunciated in our programme, by the shortest and easiest road.
The simplicity desired cannot however be attained unless all have a common starting-point, in the definition of similar polyhedrons. The best course is assuredly to consider that theory in the point of view in which it is employed in the arts, especially in sculpture; i.e. to conceive the given system of points, M, N, P, . . . . to have lines passing from them through a point S, thepole of similitude, and prolonged beyond it to M’, N’, P’, . . . . so that SM’, SN’, SP’, . . . . are proportional to SM, SN, SP, . . . . . Then the points M’, N’, P’, . . . . form a systemsimilarto M, N, P, . . . . .
The areas and volumes of the cylinder, of the cone, and of the sphere must be deduced from the areas and from the volumes of the prism, of the pyramid, and of the polygonal sector, with the same simplicity which we have required for the measure of the surface of the circle, and for the same reasons. It is, besides, the only means of easily extending to cones and cylinders with any bases whatever, right or oblique, those properties of cones and cylinders,—right and with circular bases,—which are applicable to them.
Numerical examples of the calculations, by logarithms, of these areas and volumes, including the area of a spherical triangle, will make another sheet to be presented to the examiners.
PROGRAMME OF GEOMETRY.
1. OF PLANE FIGURES.Measure of the distance of two points.—Two finite right lines being given, to find their common measure, or at least their approximate ratio.Of angles.—Right, acute, obtuse angles.—Angles vertically opposite are equal.Of triangles.—Angles and sides.—The simplest cases of equality.—Elementary problems on the construction of angles and of triangles.Of perpendiculars and of oblique lines.Among all the lines that can be drawn from a given point to a given right line, the perpendicular is the shortest, and the oblique lines are longer in proportion to their divergence from the foot of the perpendicular.Properties of the isosceles triangle.—Problems on tracing perpendiculars.—Division of a given straight line into equal parts.Cases of equality of right-angled triangles.Of parallel lines.Properties of the angles formed by two parallels and a secant.—Reciprocally, when these properties exist for two right lines and a common secant, the two lines are parallel.1—Through a given point, to draw a right line parallel to a given right line, or cutting it at a given angle.—Equality of angles having their sides parallel and their openings placed in the same direction.
1. OF PLANE FIGURES.
Measure of the distance of two points.—Two finite right lines being given, to find their common measure, or at least their approximate ratio.
Of angles.—Right, acute, obtuse angles.—Angles vertically opposite are equal.
Of triangles.—Angles and sides.—The simplest cases of equality.—Elementary problems on the construction of angles and of triangles.
Of perpendiculars and of oblique lines.
Among all the lines that can be drawn from a given point to a given right line, the perpendicular is the shortest, and the oblique lines are longer in proportion to their divergence from the foot of the perpendicular.
Properties of the isosceles triangle.—Problems on tracing perpendiculars.—Division of a given straight line into equal parts.
Cases of equality of right-angled triangles.
Of parallel lines.
Properties of the angles formed by two parallels and a secant.—Reciprocally, when these properties exist for two right lines and a common secant, the two lines are parallel.1—Through a given point, to draw a right line parallel to a given right line, or cutting it at a given angle.—Equality of angles having their sides parallel and their openings placed in the same direction.
Sum of the angles of a triangle.The parts of parallels intercepted between parallels are equal, and reciprocally. Three parallels always divide any two right lines into proportional parts. The ratio of these parts may be incommensurable.—Application to the case in which a right line is drawn, in a triangle, parallel to one of its sides.To find a fourth proportional to three given lines.The right line, which bisects one of the angles of a triangle, divides the opposite side into two segments proportional to the adjacent sides.Of similar triangles.Conditions of similitude.—To construct on a given right line, a triangle similar to a given triangle.Any number of right lines, passing through the same point and met by two parallels, are divided by these parallels into proportional parts, and divide them also into proportional parts.—To divide a given right line in the same manner as another is divided.—Division of a right line into equal parts.If from the right angle of a right-angled triangle a perpendicular is let fall upon the hypothenuse, 1othis perpendicular will divide the triangle into two others which will be similar to it, and therefore to each other; 2oit will divide the hypothenuse into two segments, such that each side of the right angle will be a mean proportional between the adjacent segment and the entire hypothenuse; 3othe perpendicular will be a mean proportional between the two segments of the hypothenuse.In a right-angled triangle, the square of the number which expresses the length of the hypothenuse is equal to the sum of the squares of the numbers which express the lengths of the other two sides.The three sides of any triangle being expressed in numbers, if from the extremity of one of the sides a perpendicular is let fall on one of the other sides, the square of the first side will be equal to the sum of the squares of the other two,minustwice the product of the side on which the perpendicular is let fall by the distance of that perpendicular from the angle opposite to the first side, if the angle isacute, andplustwice the same product, if this angle isobtuse.Of polygons.Parallelograms.—Properties of their angles and of their diagonals.Division of polygons into triangles.—Sum of their interior angles.—Equality and construction of polygons.Similar polygons.—Their decomposition into similar triangles.—The right lines similarly situated in the two polygons are proportional to the homologous sides of the polygons.—To construct, on a given line, a polygon similar to a given polygon.—The perimeters of two similar polygons are to each other as the homologous sides of these polygons.Of the right line and the circumference of the circle.Simultaneous equality of arcs and chords in the same circle.—The greatest arc has the greatest chord, and reciprocally.—Two arcs being given in the same circle or in equal-circles, to find the ratio of their lengths.Every right line drawn perpendicular to a chord at its middle, passes through the centre of the circle and through the middle of the arc subtended by the chord.—Division of an arc into two equal parts.—To pass the circumference of a circle through three points not in the same right line.The tangent at any point of a circumference is perpendicular to the radius passing through that point.The arcs intercepted in the same circle between two parallel chords, or between a tangent and a parallel chord, are equal.Measure of angles.If from the summits of two angles two arcs of circles be described with the same radius, the ratio of the arcs included between the sides of each angle will be the same as that of these angles.—Division of the circumference into degrees, minutes, and seconds.—Use of the protractor.An angle having its summit placed, 1oat the centre of a circle; 2oon the circumference of that circle; 3owithin the circle between the centre and the circumference; 4owithout the circle, but so that its sides cut the circumference; to determine the ratio of that angle to the right angle, by the consideration of the arc included between its sides.From a given point without a circle, to draw a tangent to that circle.To describe, on a given line, a segment of a circle capable of containing a given angle.To make surveys for plans.(Lever des plans.)Tracing a straight line on the ground.—Measuring that line with the chain.Measuring angles with the graphometer.—Description of it.Drawing the plan on paper.—Scale of reduction.—Use of the rule, the triangle, and the protractor.To determine the distance of an inaccessible object, with or without the graphometer.Three points, A, B, C, being situated on a smooth surface and represented on a map, to find thereon the point P from which the distances AB and AC have been seen under given angles. “The problem of the three points.” “TheTrilinearproblem.”Of the contact and of the inter of circles.Two circles which pass through the same point of the right line which joins their centres have in common only that point in which they touch; and reciprocally, if two circles touch, their centres and the point of contact lie in the same right line.Conditions which must exist in order that two circles may intersect.Properties of the secants of the circle.Two secants which start from the same point without the circle, being prolonged to the most distant part of the circumference, are reciprocally proportional to their exterior segments.—The tangent is a mean proportional between the secant and its exterior segment.Two chords intersecting within a circle divide each other into parts reciprocally proportional.—The line perpendicular to a diameter and terminated by the circumference, is a mean proportional between the two segments of the diameter.A chord, passing through the extremity of the diameter, is a mean proportional between the diameter and the segment formed by the perpendicular let fall from the other extremity of that chord.—To find a mean proportional between two given lines.To divide a line in extreme and mean ratio.—The length of the line being given numerically, to calculate the numerical value of each of the segments.Of polygons inscribed and circumscribed to the circle.To inscribe or circumscribe a circle to a given triangle.Every regular polygon can be inscribed and circumscribed to the circle.A regular polygon being inscribed in a circle, 1oto inscribe in the same circle a polygon of twice as many sides, and to find the length of one of the sides of the second polygon; 2oto circumscribe about the circle a regular polygon of the same number of sides, and to express the side of the circumscribed polygon by means of the side of the corresponding inscribed polygon.To inscribe in a circle polygons of 4, 8, 16, 32,sides.To inscribe in a circle polygons of 3, 6, 12, 24,sides.To inscribe in a circle polygons of 5, 10, 20, 40,sides.To inscribe in a circle polygons of 15, 30, 60,sides.Regular polygons of the same number of sides are similar, and their perimeters are to each other as the radii of the circles to which they are inscribed or circumscribed.—The circumferences of circles are to each other as their radii.To find the approximate ratio of the circumference to the diameter.Of the area of polygons and of that of the circle.Two parallelograms of the same base and of the same height are equivalent.—Two triangles of the same base and height are equivalent.The area of a rectangle and that of a parallelogram are equal to the product of the base by the height.—What must be understood by that enunciation.—The area of a triangle is measured by half of the product of the base by the height.To transform any polygon into an equivalent square.—Measure of the area of a polygon.—Measure of the area of a trapezoid.The square constructed on the hypothenuse of a right-angled triangle is equivalent to the sum of the squares constructed on the other two sides.—The squares constructed on the two sides of the right angle of a right-angled triangle and on the hypothenuse are to each other as the adjacent segments and entire hypothenuse.The areas of similar polygons are to each other as the squares of the homologous sides of the polygons.Notions on surveying for content (arpentage).—Method of decomposition into triangles.—Simpler method of decomposition into trapezoids.—Surveyor’s cross.—Practical solution, when the ground is bounded, in one or more parts, by a curved line.The area of a regular polygon is measured by half of the product of its perimeter by the radius of the inscribed circle.—The area of a circle is measured by half of the product of the circumference by the radius.—The areas of circles are to each other as the squares of the radii.The area of a sector of a circle is measured by half of the product of the arc by the radius.—Measure of the area of a segment of a circle.2. OF PLANES AND BODIES TERMINATED BY PLANE SURFACES.Conditions required to render a right line and a plane respectively perpendicular.Of all the lines which can be drawn from a given point to a given plane, the perpendicular is the shortest, and the oblique lines are longer in proportion to their divergence from the foot of the perpendicular.Parallel right lines and planes.—Angles which have their sides parallel, and their openings turned in the same direction, are equal, although situated in different planes.Dihedral angle.—How to measure the ratio of any dihedral angle to the right dihedral angle.Planes perpendicular to each other.—The inter of two planes perpendicular to a third plane, is perpendicular to this third plane.Parallel planes.—when two parallel planes are cut by a third plane the inters are parallel.—Two parallel planes have their perpendiculars common to both.The shortest distance between two right lines, not intersecting and not parallel.Two right lines comprised between two parallel planes are always divided into proportional parts by a third plane parallel to the first two.Trihedral angle.—The sum of any two of the plane angles which compose a trihedral angle is always greater than the third.The sum of the plane angles which form a convex polyhedral angle is always less than four right angles.If two trihedral angles are formed by the same plane angles, the dihedral angles comprised between the equal plane angles are equal.—There may be absolute equality or simple symmetry between the two trihedral angles.Of polyhedrons.If two tetrahedrons have each a trihedral angle composed of equal and similarly arranged triangles, these tetrahedrons are equal. They are also equal if two faces of the one are equal to two faces of the other, are arranged in the same manner, and form with each other the same dihedral angle.When the triangles which form two homologous trihedral angles of two tetrahedrons are similar, each to each, and similarly disposed, these tetrahedrons are similar. They are also similar if two faces of the one, making with each other the same angle as two faces of the other, are also similar to these latter, and are united by homologous sides and summits.Similar pyramids.—A plane parallel to the base of a pyramid cuts off from it a pyramid similar to it.—To find the height of a pyramid when we know the dimension of its trunk with parallel bases.Sections made in any two pyramids at the same distance from these summits are in a constant ratio.Parallelopipedon.—Its diagonals.Any polyhedron can always be divided into triangular pyramids.—Two bodies composed of the same number of equal and similarly disposed triangular pyramids, are equal.Similar polyhedrons.The homologous edges of similar polyhedrons are proportional; as are also the diagonals of the homologous faces and the interior diagonals of the polyhedrons.—The areas of similar polyhedrons are as the squares of the homologous edges.Measure of volumes.Two parallelopipedons of the same base and of the same height are equivalent in volume.If a parallelogram be constructed on the base of a triangular prism, and on that parallelogram, taken as a base, there be constructed a parallelopipedon of the same height as the triangular prism, the volume of this prism will be half of the volume of the parallelopipedon.—Two triangular prisms of the same base and the same height are equivalent.Two tetrahedrons of the same base and the same height are equivalent.A tetrahedron is equivalent to the third of the triangular prism of the same base and the same height.The volume of any parallelopipedon is equal to the product of its base by its height.—What must be understood by that enunciation.—The volume of any prism is equal to the product of its base by its height.The volume of a tetrahedron and that of any pyramid are measured by the third of the product of the base by the height.Volume of the truncated oblique triangular prism.The volumes of two similar polyhedrons are to each other as the cubes of the homologous edges.3. OF ROUND BODIES.Of the right cone with circular base.Sections parallel to the base.—Having the dimensions of the trunk of a cone with parallel bases, to find the height of the entire cone.The area of a right cone is measured by half of the product of the circumference of its circular base by its side.—Area of a trunk of a right cone with parallel bases.Volume of a pyramid inscribed in the cone.—The volume of a cone is measured by the third of the product of the area of its base by its height.2Which of the preceding properties belong to the cone of any base whatever?Of the right cylinder with circular base.Sections parallel to the base.The area of the convex surface of the right cylinder is measured by the product of the circumference of its base by its height.—This is also true of the right cylinder of any base.Measure of the volume of a prism inscribed in the cylinder.—The volume of a right cylinder is measured by the product of the area of its base by its height.—This is also true of any cylinder, right or oblique, of any base whatever.Of the sphere.Every of the sphere, made by a plane, is a circle.—Great circles and small circles.In every spherical triangle any one side is less than the sum of the other two. The shortest path from one point to another, on the surface of the sphere, is the arc of a great circle which joins the two given points.The sum of the sides of a spherical triangle, or of any spherical polygon, is less than the circumference of a great circle.Poles of an arc of a great or small circle.—They serve to trace arcs of circles on the sphere.Every plane perpendicular to the extremity of a radius is tangent to the sphere.Measure of the angle of two arcs of great circles.Properties of the polar or supplementary triangle.Two spherical triangles situated on the same sphere, or on equal spheres, are equal in all their parts, 1owhen they have an equal angle included between sides respectively equal; 2owhen they have an equal side adjacent to two angles respectively equal; 3owhen they are mutually equilateral; 4owhen they are mutually equiangular. In these different cases the triangles may be equal, or merely symmetrical.The sum of the angles of any spherical triangle is less than six, and greater than two, right angles.The lune is to the surface of the sphere as the angle of that lune is to four right angles.Two symmetrical spherical triangles are equivalent in surface.The area of a spherical triangle is to that of the whole sphere as the excess of the sum of its angles above two right angles is to eight right angles.When a portion of a regular polygon, inscribed in the generating circle of the sphere, turns around the diameter of that circle, the convex area engendered is measured by the product of its height by the circumference of the circle inscribed in the generating polygon.—The volume of the corresponding polygonal sector is measured by the area thus described, multiplied by the third of the radius of the inscribed circle.The surface of a spherical zone is equal to the height of that zone multiplied by the circumference of a great circle.—The surface of the sphere is quadruple that of a great circle.Every spherical sector is measured by the zone which forms its base, multiplied by the third of the radius. The whole sphere is measured by its surface multiplied by the third of its radius.3
Sum of the angles of a triangle.
The parts of parallels intercepted between parallels are equal, and reciprocally. Three parallels always divide any two right lines into proportional parts. The ratio of these parts may be incommensurable.—Application to the case in which a right line is drawn, in a triangle, parallel to one of its sides.
To find a fourth proportional to three given lines.
The right line, which bisects one of the angles of a triangle, divides the opposite side into two segments proportional to the adjacent sides.
Of similar triangles.
Conditions of similitude.—To construct on a given right line, a triangle similar to a given triangle.
Any number of right lines, passing through the same point and met by two parallels, are divided by these parallels into proportional parts, and divide them also into proportional parts.—To divide a given right line in the same manner as another is divided.—Division of a right line into equal parts.
If from the right angle of a right-angled triangle a perpendicular is let fall upon the hypothenuse, 1othis perpendicular will divide the triangle into two others which will be similar to it, and therefore to each other; 2oit will divide the hypothenuse into two segments, such that each side of the right angle will be a mean proportional between the adjacent segment and the entire hypothenuse; 3othe perpendicular will be a mean proportional between the two segments of the hypothenuse.
In a right-angled triangle, the square of the number which expresses the length of the hypothenuse is equal to the sum of the squares of the numbers which express the lengths of the other two sides.
The three sides of any triangle being expressed in numbers, if from the extremity of one of the sides a perpendicular is let fall on one of the other sides, the square of the first side will be equal to the sum of the squares of the other two,minustwice the product of the side on which the perpendicular is let fall by the distance of that perpendicular from the angle opposite to the first side, if the angle isacute, andplustwice the same product, if this angle isobtuse.
Of polygons.
Parallelograms.—Properties of their angles and of their diagonals.
Division of polygons into triangles.—Sum of their interior angles.—Equality and construction of polygons.
Similar polygons.—Their decomposition into similar triangles.—The right lines similarly situated in the two polygons are proportional to the homologous sides of the polygons.—To construct, on a given line, a polygon similar to a given polygon.—The perimeters of two similar polygons are to each other as the homologous sides of these polygons.
Of the right line and the circumference of the circle.
Simultaneous equality of arcs and chords in the same circle.—The greatest arc has the greatest chord, and reciprocally.—Two arcs being given in the same circle or in equal-circles, to find the ratio of their lengths.
Every right line drawn perpendicular to a chord at its middle, passes through the centre of the circle and through the middle of the arc subtended by the chord.—Division of an arc into two equal parts.—To pass the circumference of a circle through three points not in the same right line.
The tangent at any point of a circumference is perpendicular to the radius passing through that point.
The arcs intercepted in the same circle between two parallel chords, or between a tangent and a parallel chord, are equal.
Measure of angles.
If from the summits of two angles two arcs of circles be described with the same radius, the ratio of the arcs included between the sides of each angle will be the same as that of these angles.—Division of the circumference into degrees, minutes, and seconds.—Use of the protractor.
An angle having its summit placed, 1oat the centre of a circle; 2oon the circumference of that circle; 3owithin the circle between the centre and the circumference; 4owithout the circle, but so that its sides cut the circumference; to determine the ratio of that angle to the right angle, by the consideration of the arc included between its sides.
From a given point without a circle, to draw a tangent to that circle.
To describe, on a given line, a segment of a circle capable of containing a given angle.
To make surveys for plans.(Lever des plans.)
Tracing a straight line on the ground.—Measuring that line with the chain.
Measuring angles with the graphometer.—Description of it.
Drawing the plan on paper.—Scale of reduction.—Use of the rule, the triangle, and the protractor.
To determine the distance of an inaccessible object, with or without the graphometer.
Three points, A, B, C, being situated on a smooth surface and represented on a map, to find thereon the point P from which the distances AB and AC have been seen under given angles. “The problem of the three points.” “TheTrilinearproblem.”
Of the contact and of the inter of circles.
Two circles which pass through the same point of the right line which joins their centres have in common only that point in which they touch; and reciprocally, if two circles touch, their centres and the point of contact lie in the same right line.
Conditions which must exist in order that two circles may intersect.
Properties of the secants of the circle.
Two secants which start from the same point without the circle, being prolonged to the most distant part of the circumference, are reciprocally proportional to their exterior segments.—The tangent is a mean proportional between the secant and its exterior segment.
Two chords intersecting within a circle divide each other into parts reciprocally proportional.—The line perpendicular to a diameter and terminated by the circumference, is a mean proportional between the two segments of the diameter.
A chord, passing through the extremity of the diameter, is a mean proportional between the diameter and the segment formed by the perpendicular let fall from the other extremity of that chord.—To find a mean proportional between two given lines.
To divide a line in extreme and mean ratio.—The length of the line being given numerically, to calculate the numerical value of each of the segments.
Of polygons inscribed and circumscribed to the circle.
To inscribe or circumscribe a circle to a given triangle.
Every regular polygon can be inscribed and circumscribed to the circle.
A regular polygon being inscribed in a circle, 1oto inscribe in the same circle a polygon of twice as many sides, and to find the length of one of the sides of the second polygon; 2oto circumscribe about the circle a regular polygon of the same number of sides, and to express the side of the circumscribed polygon by means of the side of the corresponding inscribed polygon.
Regular polygons of the same number of sides are similar, and their perimeters are to each other as the radii of the circles to which they are inscribed or circumscribed.—The circumferences of circles are to each other as their radii.
To find the approximate ratio of the circumference to the diameter.
Of the area of polygons and of that of the circle.
Two parallelograms of the same base and of the same height are equivalent.—Two triangles of the same base and height are equivalent.
The area of a rectangle and that of a parallelogram are equal to the product of the base by the height.—What must be understood by that enunciation.—The area of a triangle is measured by half of the product of the base by the height.
To transform any polygon into an equivalent square.—Measure of the area of a polygon.—Measure of the area of a trapezoid.
The square constructed on the hypothenuse of a right-angled triangle is equivalent to the sum of the squares constructed on the other two sides.—The squares constructed on the two sides of the right angle of a right-angled triangle and on the hypothenuse are to each other as the adjacent segments and entire hypothenuse.
The areas of similar polygons are to each other as the squares of the homologous sides of the polygons.
Notions on surveying for content (arpentage).—Method of decomposition into triangles.—Simpler method of decomposition into trapezoids.—Surveyor’s cross.—Practical solution, when the ground is bounded, in one or more parts, by a curved line.
The area of a regular polygon is measured by half of the product of its perimeter by the radius of the inscribed circle.—The area of a circle is measured by half of the product of the circumference by the radius.—The areas of circles are to each other as the squares of the radii.
The area of a sector of a circle is measured by half of the product of the arc by the radius.—Measure of the area of a segment of a circle.
2. OF PLANES AND BODIES TERMINATED BY PLANE SURFACES.
Conditions required to render a right line and a plane respectively perpendicular.
Of all the lines which can be drawn from a given point to a given plane, the perpendicular is the shortest, and the oblique lines are longer in proportion to their divergence from the foot of the perpendicular.
Parallel right lines and planes.—Angles which have their sides parallel, and their openings turned in the same direction, are equal, although situated in different planes.
Dihedral angle.—How to measure the ratio of any dihedral angle to the right dihedral angle.
Planes perpendicular to each other.—The inter of two planes perpendicular to a third plane, is perpendicular to this third plane.
Parallel planes.—when two parallel planes are cut by a third plane the inters are parallel.—Two parallel planes have their perpendiculars common to both.
The shortest distance between two right lines, not intersecting and not parallel.
Two right lines comprised between two parallel planes are always divided into proportional parts by a third plane parallel to the first two.
Trihedral angle.—The sum of any two of the plane angles which compose a trihedral angle is always greater than the third.
The sum of the plane angles which form a convex polyhedral angle is always less than four right angles.
If two trihedral angles are formed by the same plane angles, the dihedral angles comprised between the equal plane angles are equal.—There may be absolute equality or simple symmetry between the two trihedral angles.
Of polyhedrons.
If two tetrahedrons have each a trihedral angle composed of equal and similarly arranged triangles, these tetrahedrons are equal. They are also equal if two faces of the one are equal to two faces of the other, are arranged in the same manner, and form with each other the same dihedral angle.
When the triangles which form two homologous trihedral angles of two tetrahedrons are similar, each to each, and similarly disposed, these tetrahedrons are similar. They are also similar if two faces of the one, making with each other the same angle as two faces of the other, are also similar to these latter, and are united by homologous sides and summits.
Similar pyramids.—A plane parallel to the base of a pyramid cuts off from it a pyramid similar to it.—To find the height of a pyramid when we know the dimension of its trunk with parallel bases.
Sections made in any two pyramids at the same distance from these summits are in a constant ratio.
Parallelopipedon.—Its diagonals.
Any polyhedron can always be divided into triangular pyramids.—Two bodies composed of the same number of equal and similarly disposed triangular pyramids, are equal.
Similar polyhedrons.
The homologous edges of similar polyhedrons are proportional; as are also the diagonals of the homologous faces and the interior diagonals of the polyhedrons.—The areas of similar polyhedrons are as the squares of the homologous edges.
Measure of volumes.
Two parallelopipedons of the same base and of the same height are equivalent in volume.
If a parallelogram be constructed on the base of a triangular prism, and on that parallelogram, taken as a base, there be constructed a parallelopipedon of the same height as the triangular prism, the volume of this prism will be half of the volume of the parallelopipedon.—Two triangular prisms of the same base and the same height are equivalent.
Two tetrahedrons of the same base and the same height are equivalent.
A tetrahedron is equivalent to the third of the triangular prism of the same base and the same height.
The volume of any parallelopipedon is equal to the product of its base by its height.—What must be understood by that enunciation.—The volume of any prism is equal to the product of its base by its height.
The volume of a tetrahedron and that of any pyramid are measured by the third of the product of the base by the height.
Volume of the truncated oblique triangular prism.
The volumes of two similar polyhedrons are to each other as the cubes of the homologous edges.
3. OF ROUND BODIES.
Of the right cone with circular base.
Sections parallel to the base.—Having the dimensions of the trunk of a cone with parallel bases, to find the height of the entire cone.
The area of a right cone is measured by half of the product of the circumference of its circular base by its side.—Area of a trunk of a right cone with parallel bases.
Volume of a pyramid inscribed in the cone.—The volume of a cone is measured by the third of the product of the area of its base by its height.2
Which of the preceding properties belong to the cone of any base whatever?
Of the right cylinder with circular base.
Sections parallel to the base.
The area of the convex surface of the right cylinder is measured by the product of the circumference of its base by its height.—This is also true of the right cylinder of any base.
Measure of the volume of a prism inscribed in the cylinder.—The volume of a right cylinder is measured by the product of the area of its base by its height.—This is also true of any cylinder, right or oblique, of any base whatever.
Of the sphere.
Every of the sphere, made by a plane, is a circle.—Great circles and small circles.
In every spherical triangle any one side is less than the sum of the other two. The shortest path from one point to another, on the surface of the sphere, is the arc of a great circle which joins the two given points.
The sum of the sides of a spherical triangle, or of any spherical polygon, is less than the circumference of a great circle.
Poles of an arc of a great or small circle.—They serve to trace arcs of circles on the sphere.
Every plane perpendicular to the extremity of a radius is tangent to the sphere.
Measure of the angle of two arcs of great circles.
Properties of the polar or supplementary triangle.
Two spherical triangles situated on the same sphere, or on equal spheres, are equal in all their parts, 1owhen they have an equal angle included between sides respectively equal; 2owhen they have an equal side adjacent to two angles respectively equal; 3owhen they are mutually equilateral; 4owhen they are mutually equiangular. In these different cases the triangles may be equal, or merely symmetrical.
The sum of the angles of any spherical triangle is less than six, and greater than two, right angles.
The lune is to the surface of the sphere as the angle of that lune is to four right angles.
Two symmetrical spherical triangles are equivalent in surface.
The area of a spherical triangle is to that of the whole sphere as the excess of the sum of its angles above two right angles is to eight right angles.
When a portion of a regular polygon, inscribed in the generating circle of the sphere, turns around the diameter of that circle, the convex area engendered is measured by the product of its height by the circumference of the circle inscribed in the generating polygon.—The volume of the corresponding polygonal sector is measured by the area thus described, multiplied by the third of the radius of the inscribed circle.
The surface of a spherical zone is equal to the height of that zone multiplied by the circumference of a great circle.—The surface of the sphere is quadruple that of a great circle.
Every spherical sector is measured by the zone which forms its base, multiplied by the third of the radius. The whole sphere is measured by its surface multiplied by the third of its radius.3