THE MCMAHON COMPRESSED AIR DRIVEN BIPLANE
Inthe McMahon model we find a very satisfactory type of compressed air driven model. On several occasions this model has made flights of over 200 feet with a duration of between 10 and 15 seconds, and the indications are that by the use of a more powerful engine the model can be made to fly a greater distance, with a corresponding increase of duration. The engine used in connection with the model is of the two cylinder opposed type, such as described in the foregoing paragraphs. The tank, however, is somewhat different in design from that just described, it having been made of 28 gauge sheet bronze, riveted every one-half inch. The two long bolts that hold the steel caps on either end of the tank also serve as attachments for the spars that hold the tank to the engine bed, as shown indiagram 17. The tank has been satisfactorily charged to a pressureof 200 lbs. per square inch, but only a pressure of 150 lbs. is necessary to operate the engine. The tank measures 10″ in length by 3″ in diameter and weighs 7 ounces.
The wings of this machine are single surfaced and covered with fiber paper. The top wing measures 42″ in span by 6″ in chord. The lower wing is 24″ by 6″. The wings have a total surface of 396 square inches and are built up of two ³⁄₁₆″ dowel sticks, flattened to streamline shape. Only two sets of uprights separate the wings, thus adding to the streamline appearance of the machine.
Both tail and rudder are double surfaced and are built entirely of bamboo for lightness, the tail being made in the form of a half circle measuring 12″ by 8″. Steel wire is used on the construction of the landing chassis, the chassis being so designed as to render it capable of withstanding the most violent shock that it may possibly receive in landing. The propeller used in connection with the model is 14″ in diameter and has an approximate pitch of 18″.