A Comb Cleaner
The Twisted Wires Form an Excellent Device for Cleaning a Comb
The Twisted Wires Form an Excellent Device for Cleaning a Comb
A very handy device for cleaning combs can be made from a piece of spring sheet brass, 4¹⁄₂ in. long and about 3 in. wide. Notches are cut in the ends of the brass with a hacksaw, making the projections as wide as the saw cut. The brass is then bent into shape with a special clamp made for the purpose, which consists of three pieces of wood, two being cut to form a curved slot, then fastened to the third piece. The brass is sprung into the slot, and then fine wire is stretched between the ends in the notches. The wire should be very fine and two strands twisted together and run through the notches.