Plate X.SCOTTS' FIRST P. AND O. LINER, THE "TAGUS."Larger image
Plate X.
SCOTTS' FIRST P. AND O. LINER, THE "TAGUS."
Larger image
TheTagus,[37]which was thus amongst the first of the P. and O. steamers, was built in 1837. She had a length of 182.1 ft., a beam of 26 ft., and a depth of 17 ft. 4 in., the burden tonnage being 709 tons. When carrying 265 tons of coal in her bunkers and 300 tons of cargo, the draught was 14 ft. 6 in. The side-lever engines which were fitted to her had a cylinder 62 in. in diameter, with a 5-ft. 9-in. stroke, developed 286 horse-power, and operated paddle-wheels 23 ft. 6 in. in diameter. Two of the other early steamers, theJupiterand theMontrose, were also constructed by the Scotts.
The conveyance of cargo and passengers across the Isthmus of Suez not only involved inconvenience and expense, but was a cause of great delay. There was still, however, a strong prejudice against steamships being utilised for long sea voyages, partly because of vested interests in sailing ships. Sir John Ross, C.B., who, in 1818 and in 1829 to 1833, made Arctic explorations, was one of the strongest advocates for a service to India by way of the Cape of Good Hope; and, in order to establish the feasibility of the undertaking, made experiments with theCity of Glasgow, built by the Scotts in 1821. This vessel, of 283 tons, had in the interval been fitted with new boilers, with special safety appliances, and they worked at 4-lb. pressure; they gave the high evaporation in those days of 9 lb. of water per pound of coal.[38]
This vessel made the trip from London Bridge to the lightship off Spithead (246 miles) in thirty-one hours five minutes, on a consumption of 6 lb. of fuel per indicated horse-power per hour. These facts were utilised by Sir John Ross in his advocacy of the route, and a new company was formed, under his chairmanship, in 1837.
The first vessel of the fleet, named theIndia, wasbuilt and engined by the Scotts, and was a few years later transferred to the Peninsular and Oriental Company. TheIndia, launched in 1839, was the largest steamer built on the Clyde up to that date, being 206 ft. 6 in. long, 30 ft. 9 in. beam, or 48 ft. wide over the paddle-boxes. The gross tonnage was 1206 tons. Accommodation was provided for eighty cabin passengers, and provision made for 400 tons of cargo. A feature of her construction was the provision of two strong bulkheads of iron across the engine-room, in order to avoid accidental outbreak of fire, and also to prevent water from a leak in one part spreading to another.[39]This was probably the beginning—nearly seventy years ago—of the system of division by watertight bulkheads, now universal. Its compulsory adoption was advocated by the Institution of Naval Architects in 1866, and enforced by Lloyds in 1882, and by the Board of Trade in 1890. The machinery was of 320 horse-power, and had surface-condensers. TheIndiawas launched on the anniversary of the birth of James Watt, and a salute of twenty-one guns was fired as the vessel left the ways.
Five other steamers were built for the service, and the voyage took from fifty-five to sixty days, as compared with the one hundred and thirteen days occupied by theEnterprise. A monthly service was thus rendered possible. At the same time the Scotts built steam vessels for the coasting trade of India and of South Africa.
The type of machinery in use at this period is illustrated on the opposite page. This particular engine was constructed in 1838. The piston was connected to one end of the side-levers, while the crank was operated from the other. The paddle-wheel of this engine was 25 ft. 0-1/2 in. in diameter, with seventeen floats. For about thirty years this was the standard type of marine engine for paddle steamers.
The Gothic architectural design for the main framingwas gradually abandoned for something less ornamental and perhaps more mechanical.
TYPE OF SIDE-LEVER ENGINE OF 1840.Larger image
TYPE OF SIDE-LEVER ENGINE OF 1840.
Larger image
The Royal West India Mail Company's Service, still one of the best known of British lines, was commenced in 1841. Some of the steamers were purchased, but amongst those built originally for the service was theDeeby the Scotts. She was 213 ft. 9 in. long, 30 ft. 4 in. beam, and 30 ft. in depth, the burden tonnage being 1848 tons. On a draught of 17 ft. 6 in. she carried 700 tons of cargo; and, as with most of the oversea liners of the period, the average speed was only about 8 knots. The voyage of 13,650 miles occupied then one hundred and nine days, including stoppages; and the consumption of fuel was 25-1/2 tons per day. The engines, which had cylinders73 in. in diameter with a stroke of 7 ft., were of 450 horse-power, driving side paddle-wheels 28 ft. 6 in. in diameter.[40]
In the thirty years from the first commercial British steamer, theComet, there had not been much advance in the steam engine, excepting in size, power, and, perhaps, reliability. Wood had continued to be the constructive material for all but the smallest ships. The size of vessels had grown steadily to the 1848 tons of the West Indian mail liner, which started regular steamship service almost contemporaneously with the inauguration of the Atlantic mail line by the Cunard Company in 1840. Speeds on service, even on the shortest routes, were seldom over 13 knots, and on the long routes under 8 knots. But this was in excess of the average attained by all but exceptionally fast clippers. The Table on the opposite page shows the progress made in thirty years.