The machine complete does not weigh over 7 ounces. The power plant used in connection with this model is of the two cylinder opposed engine type, with tank such as has just been described in the foregoing chapter.
The tank is mounted in the frame by drilling a ¹⁄₁₆″ hole through either end of the tank, through which a drill rod of this diameter can be inserted. About ³⁄₄ths of the drill rod should extend out on each side of the tank, to permit the fastening of the tank to the frame side members. This method of mounting the tank serves two purposes to a satisfactory degree. First, it permits secure fastening; second, as the rods are passed through the side and cap of the tank they help materially in preventing the caps from being blown off in the event of excessive pressure.